Page number 4
O M r J d B5 e Plu r s i o n rd g erin e g x ex a am m ple ple MJB Special/Standard code no. 000 No. of OPENBUS™ connections 4 Configuration Number 000 Not used - Colour 1 HardWare version 0 IP Degree 2 Cable 3 MJB5 Plus UBL (int.) and Switch Input | 4 000 = 502 = 504 = 505 = 506 = 509 = 1 = 3 = 4 = 5 = Port repeater box (without functionality) SMPS 4W (Switch Mode Power Supply) Gateway UBL (Internal) / Switch input (S1 + S2) UBL (External) / Switch input (S1 + S2) Analog ue to OPENBUS TM Converter F or standard code: 502 (Ports: 1=OB, 2=third party) F or standard code: 504 (Ports: 1=OB, 5=Third party) F or standard code 000: 3 ports F or standard code 000: 4 ports F or standard code: 505, 506 & 509 F or standard code 000: 5 ports 000 = 001-099 = 100-999 = Port repeater box (without functionality) S tandard configuration S pecial configuration - = Not used 1 = Light grey (RAL 7035) 0= No Power request 1 = HW-variant with power request on all ports where it is possible 2 = HW-variant with power request on port 2 (Only for MJB509) 3 = HW-variant with power request on port 4 & 5 (Only for MJB509) 2 = IPX6 9 = IPX6 Washable DURA TM 3 = No cable Chosen item number: MJB0004000-1023 Modular plug cable for connection of OpenBus™ control box to MJB5 Plus has to be ordered separately. Please remember to order DURA cable and blind plug if IP degree IPX6 Washable DURA™ is required.
Page number 5
Port 3 Not available in version with internal UBL MJB5 Plus UBL (int.) and Switch Input | 5 Port 5 OpenBus™ connection / S1 pin 2 & 8 / S2 pin 2 & 9 Port 4 OpenBus connection / S1 pin 2 & 8 / S2 pin 2 & 9 Port 2 OpenBus connection / S1 pin 2 & 8 / S2 pin 2 & 9 Port 1 OpenBus connection Standard functionality UBL The UBL LED can be switched on and off via the patient control (Key 1) or the attendant control (Key 2). External Switch (S1/S2) The external switch is connected to S1: Pin 2 & 8/S2: Pin 2 and 9 on Port 2, Port 4 or Port 5. The Switch input functionality can be enabled/disabled via the attendant control. The enable/disable status (switch status) is indicated on the OpenBus. The switch input functionality is as standard to be used with a NO switch. When the switch is activated (NC), a notification is sent on the OpenBus (switch notification). OpenBus™ standard configuration Versions 505-010 and 505-020 MJB 5 0 5 4 0 1 0 - 1 0 2 3 HardWare version: 0 Standard UBL int. / Switch input (S1/S2) 0 1 0 DN (Device Number) 140 UBL Key 1: UBL Key 2: S1 Enable/disable Key 1: S1 status: S1 alarm: S2 Enable/disable Key 1: S2 status: S2 alarm: UBL int. / Switch input (S1/S2) 0 2 0 DN (Device Number) 141 UBL Key 1: UBL Key 2: S1 Enable/disable Key 1: S1 status: S1 alarm: S2 Enable/disable Key 1: S2 status: S2 alarm: H28 (ID1) E28 (ID5) E22 + E27 (ID5) E7 (ID5) E6 (ID5) E23 + E27 (ID5) E9 (ID5) E8 (ID5) H28 (ID1) E28 (ID5) Disabled Disabled Disabled Disabled Disabled Disabled * Service Data Tool 2, can read out the special/standard code n o . and configuration. * The switch input S1/S2 is by default “Disabled” (factory setting). When using 2 x UBL (left/right side of bed) it is important to order the MJB5 Plus with 2 different device numbers. Otherwise it is not possible to define the MJB5 Plus through SDT2. Order variant 505-010 & 505- 020.
