CS16 - CS28 - CS32 The CS16 electronic limit switch is connected between the LINAK® actuator and a non-LINAK power supply, where it cuts out the current to the actuator in end position or if an obstacle is encountered. The PCB contains a variable current limit setting and is available in different versions, depending on which actuator it is to be used with. The CS16 is an important component which ensures a long life for the actuator. Features: • CS16 is easily installed between the LINAK linear actuator and the power supply • It may be used in connection with many types of signal sources such as the LINAK HB41 handset • Control current: max. 100 mA • Available with potentiometer (for current limit setting) ensuring that the CS16 cuts out the actuator in the end positions • Possibility of parallel connection of CS16 units. With one handset push button it is possible to control several parallel connected CS16 units. The actuators will run simultaneously. • LA28/LA28S/LA32 LINAK can deliver a built-in limit switch respectively CS28, CS28S and CS32 • CS28/CS28S/CS32 are connected between a LINAK actutor and the power supply and are mounted in the LA28/LA28S/ LA32 motor housing; the actuator can thus be directly connected to a 24V power supply • CS28/CS28S/CS32 trip out the current to the actuator in end position (or if an obstruction is encountered - overload) • Control current to CS28/CS28S/CS32 is max. 100mA • Supply voltage: it is important that the supply voltage 24 V DC connection is correct, otherwise the CS-circuit may be ruined Options: • Possible to mount the CS16 PCB inside an aluminium box (2 versions available) together with four different connection terminals LINAK.COM/TECHLINE
Download PDF file