Configure the IC actuator with BusLink 2 software The actuator can be controlled from within the software using the buttons at the bottom of the screen. These controls are available at all times. The “Run In/Out” buttons will run the actuator to the limits, real or virtual. The step controls will move the actuator in selectable increments. The “Run To” function will move the actuator to an arbitrary specified position. The actuator’s current status is shown on the right. These values are actively recorded in a graph that will be explained later in this user guide. Configure: Once connected, you will be able to click on one of three tabs in the top left. If you select CONFIGURE, this screen will appear: The overview will give you read-only information about the currently implemented parameters that can be edited. Each parameter can be modified by clicking on the menu item to the left. Any changes made will be shown in the “Unapplied Changes” box and will remain until you “Apply” the changes to the actuator. 5
Download PDF file