Side 1

Alarms and false alarms The panel sends an alarm signal to the Monitoring Service. The Monitoring Service will then respond as arranged with you. Typically, a guard will be dispatched to your home. If you arrive at the panel when the alarm condition is active - with a sounding siren (the siren falls silent after 3 min.) and the red LED flashes do the following: 1) Press the key to display the activated sensors. 2) Then enter your user code. Services are now turned off and a ‘clear’ message is automatically sent to the Monitoring Service. The red LED will continue to flash until the panel is reconnected, or if you browse through the event log. If you want information about where in the house the alarm is enabled do the following: 1) Enter followed by the code 2) Select the event log by pressing 6-1, use the and events. 3) To finish viewing the event log press the key 3 times. keys to view previous If you have caused an alarm by mistake, it must be reported to the Monitoring Service. This must be done immediately after you have caused the alarm: 1) You can cancel a false alarm simply by entering your user code. This stops the siren and sends a message to the Monitoring Service if the alarm is turned off by an authorized user. APP - for Smartphone G4S Homelink allows you to control and monitor your G4S SmartAlarm P7 using your Wi- Fi or 3G iPhone, iPod Touch or iPad. Using G4S HomeLink you can arm and disarm your alarm. Furthermore, you can receive photo verification in the event of a burglar alarm and you can take snapshots whenever it suits you, equally you can see the history, previous photos, devices and more. Useful phone numbers: Monitoring Service:(+45) 70 33 22 11 Contact Center : (+45) 70 33 00 40 G4S Security Services A/S Roskildevej 157 2620 Albertslund Phone: (+45) 4386 5000 User Manual SmartAlarm – P7