SETTING OF CERTAIN AREAS (User assigned multiple areas without permission to the Set All feature). 1. Enter your code - status of all areas displayed. 2. Press Ò for setting - first unset area is displayed. 3. Press Ò for setting the area. 4. Press Ö for next unset area. 5. Press Ò for setting the area. 6. Press × for return to status display. 7. Press × to log out. SETTING OF ALL USER AREAS (User assigned multiple areas with permission to Set All Feature). 1. Enter your code - status of all areas displayed. 2. Press Ò for setting 3. Press Ò for setting all areas or Ö for setting individual areas, as described in the previous table. 4. Press Ò to set everything. 5. Press × for return to status display. 6. Press × to log out. SETTING FAULTS In case of set faults, the buzzer sounds in the control panel for 5 seconds and the input name and set fault are displayed. Remove the cause of the alarm and make a new setting. If the error can not be removed, the alarm input can be isolated, as follows: ISOLATE ALARM INPUT 1. Enter your code. 2. Press Ò for setting. 3. Press Ó to isolate. 4. Press Õ for Yes to isolate. 5. Press × to return. 6. Press Ò for setting. 7. Press × to log out ALARM RESET If the ThorGuard system has been in alarm, it is necessary to reset this. To reset the alarm, follow these steps. 1. Enter your code. 2. Press if necessary on Ó to unset. 3. Press Õ to see the first alarm. 4. Press Õ several times to see the status and alarm time. 5. You must remove the alarm cause before you can reset the alarm. 6. Press to reset the alarm or 7. Press Ö to see the next alarm. 8. At the end of the list, press to reset all alarms, or press Ö to get back to the first alarm. 9. Press Ò , if you want to set the area. 10. Press × to log out. Call G4S Control Center and give G4S your subscription number or address and password. G4S Security Services A/S, Roskildevej 157, 2620 Albertslund, DK Web: www.g4s.dk 18.12.2019 Product Management - KLP/je
Download PDF fil