Page number 2
SPECIFICATIONS FlowCon Actuators FlowCon Actuator 2 T.0.2 Supply voltage 24V AC / 30V DC Type Electrical, bi-directional motor Power consumption 8VA Control signal Analog (0)2-10V DC or 4-20mA Feedback Analog (0)2-10V DC or 4-20mA Failsafe function Fail in place Auxiliary switches Optional as plug on module Operation time 85-90 sec Ambient temperature -30°C to +50°C / -22°F to +122°F Humidity rating 5.95% rH, no condensation Protection IP22 / NEMA2, indoor use only - upgradable to IP54 / NEMA3R Cable (supply) Not included, recommended 0.75 mm 2 /AWG18 Weight 2.7 kg / 5.9 lb Note 2: FlowCon recommends actuators supplied by FlowCon International. T.0.3 120V AC / 240V AC Electrical, bi-directional motor 7VA Digital 2-position / 3-point floating No Fail in place Optional as plug on module 60-85 sec -30°C to +50°C / -22°F to +122°F 5.95% rH, no condensation IP22 / NEMA2, indoor use only - upgradable to IP54 / NEMA3R Not included, recommended 0.75 mm 2 /AWG18 2.3 kg / 5.0 lb T.0.4 24V AC / 30V DC Electrical, bi-directional motor 7VA Digital 2-position / 3-point floating No Fail in place Optional as plug on module 60-85 sec -30°C to +50°C / -22°F to +122°F 5.95% rH, no condensation IP22 / NEMA2, indoor use only - upgradable to IP54 / NEMA3R Not included, recommended 0.75 mm 2 /AWG18 2.0 kg / 4.4 lb DIMENSIONS AND WEIGHT (NOMINAL) Model Valve size L1 L2 3 H1 no. (max. length) mm mm mm mm (in) (in) (in) (in) F3WR.J_ 100 (4) 302 363 229 (11.9) (14.3) (9.0) F3WR.K_ 125 (5) 353 (13.9) 389 (15.3) 254 (10.0) F3WR.L_ 150 (6) 404 (15.9) 414 (16.3) 279 (11.0) Note 3: Note 4: Note 5: L2 is maximum length, which is measured to end flange or mounting plate, whichever extends further. Weight does not include actuator. Kv is for straight through Kv (A to AB). Bypass Kv (B to AB) would be 70-80% of straight through Kv. H2 D Weight 4 (depth, not shown) mm mm kg (in) (in) (lb) 493 267 34.0 (19.4) (10.5) (75) 516 305 40.8 (20.3) (12.0) (90) 544 (21.4) 340 (13.4) 47.6 (105) Kv 5 m 3 /hr 79 102 131 170 220 283 125 160 208 267 346 180 232 299 381 499 562 H2 H1 L1 L2 Tech note · FlowCon Unimizer ® 3-way DN100-150 · january 2025 · www.flowcon.com Page 2 of 7
Page number 3
FLANGE MATCH Model no. F3WR.J_ F3WR.K_ F3WR.L_ Flange size (“) 4 5 6 ASME B16.1 Class 125 ASME B16.5 Class 150 Flange size (mm) 100 125 150 PN10 EN 1092-1 PN16 PN25 PN40 MODEL NUMBER SELECTION Valve size: J = DN100 / 4” K = DN125 / 5” L = DN150 / 6” F3WR . . .L .S .M.1 . . Kv ID-number: A , B , C , D , E or F (see flow rate table page 5) Actuator: 1 = FlowCon Type of actuator: 00 = no actuator Gear 24V modulating 70 = T.0.2 120V / 240V digital 20 = T.0.3 24V digital 10 = T.0.4 ID tag: 0 = T = no ID tag (standard) hanging ID tag Example: F3WR.J.C.L.S.M.1.10.0 = FlowCon Unimizer ® 3-way, DN100 (4”) with Kv=131 m 3 /h, and FlowCon 24V 2-position actuator, without hanging ID tag. Note: If auxiliary switches are required, order the plug on auxiliary switch module, T-Aux seperately. Tech note · FlowCon Unimizer ® 3-way DN100-150 · january 2025 · www.flowcon.com Page 3 of 7
