FlowCon Energy FIT-G System Energy-Saving Pressure Independent Temperature Control System DN15-50 / 1/2”-2” SPECIFICATIONS FlowCon PICV valve: Static pressure: Ambient temperature: Media temperature: Material: - Housing and cover/headnut: - Composite components: - Metal components (internal): - O-rings: - Cone: - Seats: - Diaphragm: Stroke: Maximum close off pressure: Maximum operational ΔP: Control characteristic: Control range: Rangeability: Turn down ratio: Shut-off leakage: Flow rate range: End connection 1 : Body taps: 2500 kPa / 360 psi +1°C to +50°C / +34°F to +122°F -20°C to +120°C / -4°F to +248°F DN15-32 (1/2”-1 1/4”): Forged brass ASTM CuZn40Pb2 or DZR CuZn36Pb2As DN40-50 (1 1/2”-2”): Forged brass ASTM CuZn40Pb2 or Ductile iron ASTM A395 Grade 60-40-18 Glass-reinforced PSU/POM/PPS Stainless steel EPDM DN15-32 (1/2”-1 1/4”): PPS DN40-50 (1 1/2”-2”): EDPM DN15-25 (1/2”-1”) with 20 mm (3/4”) insert: EPDM DN25-32 (1”-1 1/4”) with 40 mm (1 1/2”) insert: Hydrogenated acrylonitrile- butadiene-rubber DN40-50 (1 1/2”-2”) (one-unit): Hydrogenated acrylonitrile-butadiene-rubber DN15-25 (1/2”-1”) with 20 mm (3/4”) insert: 3.4 mm / 0.13 in DN25-32 (1”-1 1/4”) with 40 mm (1 1/2”) insert: 5.2 mm / 0.2 in DN40-50 (1 1/2”-2”) (one-unit): 6.2 mm / 0.24 in 800 kPa / 116 psi DN15-32 (1/2”-1 1/4”): 800 kPaD / 116 psid DN40-50 (1 1/2”-2”): 600 kPaD / 87 psid Linear flow 1:800 / IEC 60534 100:1 100:1 ANSI / FCI 70-2 2006, Class IV / IEC 60534-4, Class IV 0.0103-3.79 l/sec / 0.163-60.0 GPM Fixed female ISO or NPT 1/4” ISO Note 1: NPT only available ex. US-factory Tech note · january 2023 · www.flowcon.com Page 1 of 12
Download PDF file