FlowCon SM DN15-250 (1/2”-10”) 09/2025 Service Menu The service menu is a diagnostic opportunity for FlowCon’s Service Team and can be accessed at any time. To enter the service menu, simul- taneously press and buttons for 6 sec. To change value, press or . For quick scroll through values press and hold or . Press to accept value and go to next step and press to go to previous step. For fast menu exit simultaneously press and buttons for 6 seconds. The actuator will auto- matically return to normal operation mode if no action is detected on arrow keys for 10 minutes. All values in the service menu are stored in non-volatile memory. Service Display 01 * passwrd 0000000 02 * cycles 30617 03 * rotat 305785 04 * temp 34.5 ° c 05 * err 01 10 Description Enter password to enter service menu *scrolling top: ENTER PASSWRD Number of movements initiated by the actuator Values Default: 6629653 Press and to change digits. Press and to move between digits. At last digit, press to go to next step. *scrolling top: cycles Number of total full turn rotations, that the actuator has done *scrolling top: Total rotat Current temperature inside actuator. Temperature sensor holds ±0.5°C accuracy Unit is °C *scrolling top: internal temp Number of times each alarm has Press and to move between the dif- occurred ferent alarms. If an alarm has occurred more than 9,999,999 times, it will be shown on 2 displays: 10M 000,000 *scrolling top: Code Scrolling top Description ERR 01 OVER TORQUE Over torque error ERR 02 WAS OVER TORQUE Over torque warning ERR 03 OVER TEMP Over temperature error ERR 04 HIG TEMP High temperature warning ERR 05 POWER SUPPLY Power failure warning (only SM.0.0.1.4/6) ERR 06 CONTROL SIGNAL Control signal error ERR 07 VALVE Lack of valve error ERR 08 BATTERY Battery warning (only SM.0.0.1.4/6 ) ERR 09 BACNET BACnet fallback error (only SM.0.0.1.5/6) This paper is a supplement to the FlowCon SM Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 1 of 6
Download PDF file