FlowCon FIT FlowCon Energy FIT System - Energy-Saving Pressure Independent Temperature Control System The FlowCon Energy FIT System is typically instal- led on FCUs, AHUs or in the Plantroom suitable for submetering applications and includes: Intelligent Interface Connects all FIT components and BMS. It measures energy usage while providing remote monitoring via BACnet. The main FIT control modes are direct ΔT control, direct comfort control and SMART control. PICV with electrical actuator Maintains correct flow despite pressure changes and guarantees that flow and actuator position only change when demand requirements change or ΔT is outside specification. Size: DN15-250 / 1/2”-10”. Max. operational ΔP: 800 kPaD / 116 psid. Max. flow rates: 0.0103-76.8 l/sec / 0.163-1220 GPM. Media temperature: -20°C to +120°C / -4°F to + 248°F. . Integrated Flow meter Likewise, the Intelligent Interface calculates the flow and displays data via Bluetooth ® on cell phone or in BMS via BACnet. Bluetooth ® In combination with the FlowCon App, the Intelligent Interface can provide readings from the FIT System locally via Bluetooth ® . Data includes T1, T2, ΔT, P1, P2, ΔP, Flow, BTU and ΔT Target. ∆T ΔT control Flow only changes when demand requirements change or ΔT is outside of specification - The FIT System provides full ΔT control. For further information visit www.flowcon.com Temperature sensors PT1000 sensors measure the ΔT across the coil allowing the Intelligent Interface to adjust according to ΔT target. ∆T Pressure sensors 25 bar pressure sensors measure up/downstream pressure allowing the BMS to lower system pressure to PICV’s requirements and reduce pump energy consumption. Integrated energy meter The Intelligent Interface calculates the energy and displays data via Bluetooth ® on cell phone or in BMS via BACnet. FlowCon International can accept no responsibility for possible errors in any printed material. All rights reserved. 03.2023 www.flowcon.com DENMARK • DUBAI • USA • CHINA • SINGAPORE
Download PDF file