White Black Red White Black Red FlowCon FNR Actuators 1B95088 - 06/2023 Wiring FlowCon FNR (analog) FNR.0.2 Actuator 0-10V modulating Input signal 0-10V DC Power 24V AC/DC Ground/common FlowCon FNR (digital) FNR.0.3 Actuator 2-Position FNR.0.2-EQ Actuator 0-10V modulating Input signal 0-10V DC Power 24V AC/DC Ground/common White Black Red Open Close Power 110/230V AC Ground/common FNR.0.3 Actuator 3-Point Floating Stop Open Close Power 110/230V AC Ground/common White Black Red Start-up Sequence When power to the actuator is turned on, the actuator will automatically calibrate to deter- mine closing point and stroke length of the in- sert. Hereafter it will proceed to normal opera- tion mode (according to control signal). Manual Override Before performing override, please turn off the power supply. Lift the silicone cap on top of the actuator to get access to manual override. Man- ual override is performed with a 4 mm (~5/32”) hex key. Counter-clockwise turning will open the valve and clockwise turning will close the valve. FlowCon International assumes no responsibility for mistakes, if any, in any printed material. This paper is a supplement to the FlowCon General Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 2 of 2
下载PDF文件