FlowCon B Actuators 01/2025 FlowCon B - ANALOG FlowCon B.0.2 (0)2-10V modulating Input signal (0)2-10V DC Feedback signal (0)2-10V DC Power 24V 30V AC DC Ground/common FlowCon B.0.2 4-20 mA modulating Input signal 4-20 mA Feedback signal 4-20mA Power 24V 30V AC DC Ground/common FlowCon B - DIGITAL FlowCon B.0.3 2-position, CW Analog setting (B.0.2) As standard the actuator comes with 2-10V control and feedback signal. This can easily be changed to 4-20mA control and feed- back signal by flipping DIP switches #3 and #4 from OFF to ON. If 0-10V control and feedback signal is required, make sure that all DIP switches are set to OFF. Then press and hold the push button on the PCB for 3 seconds. LED will blink red once. Press and release the push button again. LED will now blink red twice. Then flip #2 to ON and back to OFF. Press and hold the push button on the PCB for 3 seconds to save 0-10V setting. FlowCon B.0.3 3-point floating, CW CW CCW FlowCon B.0.4 2-position, CW Power 240V AC Ground/common CW CCW FlowCon B.0.4 3-point floating, CW Power 240V AC Ground/common CW CCW Power 24V 30V AC DC Ground/common Plug on module (default position setting) CW CCW FlowConFBlo-wACuxon B-Aux Aux. swiAtcuhxm. sowdiutcleh, mCWodule, CW FlowConFBlo-wACuxon B-Aux Aux. swiAtcuhxm. sowdiutcleh, mCCodWule, CCW Power 24V 30V AC DC Ground/common Blue Upper Closed 0-10º Upper Closed 10-90º White UUppppeerr CCloosmemdo0n-10º BrBoluwne LUopwpeerr CClloosseedd 8100--9900ºº GrWehietne LUopwpeerr CCloosmemdo0n-80º BroRewdn LLoowweerr CCloosmemdo8n0-90º GBrleaecnk Red Black Lower Closed 0-80º Lower Common Upper Closed 80-90º Blue Lower Closed 10-90º Red LLoowweerr CCloosmemdo0n-10º GBrleaecnk LUopwpeerr CCloosmemdo1n0-90º BroRewdn LUopwpeerr CClloosseedd 00--1800ºº GrWehietne UUppppeerr CCloosmemdo8n0-90º BrBoluwne Upper Closed 0-80º White Black Lower Common This paper is a supplement to the FlowCon General Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 2 of 4
下载PDF文件