MODEL NUMBER SELECTION Type of housing: 20 mm / 3/4" insert: A.15 = A, DN15 / 1/2" A.20 = A, DN20 / 3/4" A.25 = A, DN25 / 1" AB.15 = AB, DN15 / 1/2" AB.20 = AB, DN20 / 3/4" AB.25K = AB, DN25 / 1" ABV.1 = ABV, DN15-25 / 1/2"-1" 40 mm / 1 1/2" insert: AB.25 = AB, DN25 / 1" AB.32 = AB, DN32 / 1 1/4" ABV.2 = ABV, DN25-40 / 1"-1 1/2" P/t plug requirements: 0 = no (p/t) plugs B = pressure/temperature plugs P = taps plugged . . . . . . . Union end connections (inlet x outlet): 0.0 = no union ends Model and size Female threaded ABV.1 with F360xxx E = 15 mm / 1/2” F = 20 mm / 3/4” ABV.2 with F361xxx G = 25 mm / 1” P = 32 mm / 1 1/4” Q = 40 mm / 1 1/2” Male threaded H = 15 mm / 1/2” I = 20 mm / 3/4” J = 25 mm / 1” J = 25 mm / 1” S = 32 mm / 1 1/4” T = 40 mm / 1 1/2” Sweat K = 15 mm L = 18 mm M = 22 mm N = 28 mm W = 35 mm Connection standard: I = ISO N = NPT Insert: 0 F360 F361 = no insert = 20 mm / 3/4" insert = 40 mm / 1 1/2" insert Pressure range (last digit in the flow rate tables, pages 4 and 5 under "marking"): 0 = no insert 1 = 10-95 kPaD / 1-14 psid 2 = 22-210 kPaD / 2-32 psid 4 = 40-390 kPaD / 4-57 psid 8 = 90-880 kPaD / 8-128 psid Flow rate 0.0 = x.x = No insert First two digits in the flow rate tables (pages 4 and 5) under "marking" Example: AB.20.B.0.0.I.F360.2.0.5 = DN20 (3/4”) AB housing with p/t plugs and FlowCon stainless steel insert, marked 05-2 in 22-210 kPaD (2-32 psid) and a flow of 0.158 l/sec (2.50 GPM). Tech note · FlowCon SS Insert · may 2025 · www.flowcon.com Page 3 of 7
Download PDF file