SPECIFICATIONS (.continued) FlowCon FN.0.2-BUS Supply voltage: Type: Power consumption: Inrush current: Control signal: Resolution: Feedback: Failsafe function: Manual override: Position indicator: Operation time: Actuating force: Stroke: Ambient temperature 2 : Media temperature: Humidity rating: Protection: CE conformity: Closing point adjustment: Cable: - Group 1: - Group 2: Recommended cable: Recommended cable length: 24V AC/DC ±10%, 50/60 Hz Electrical, bi-directional synchronous motor 24V AC: 2.1 VA standby / 3.6VA operating / 5.4VA max. 24V DC: 1.0 W standby / 1.8W operating / 2.7W max. 24V AC: 7.2A (peak) 24V DC: 5.0A (peak) 0-100% (BACnet or Modbus) 1:100 (0-10V) Yes, 0-100% (BACnet or Modbus) Fail in place Yes, with magnet Yes 22 sec/mm (alternatively 16 sec/mm or 28 sec/mm) 220N (-40N/+60N) 9 mm / 0.35 in 0°C to +50°C / +32°F to +122°F -10°C to +120°C / +14°F to +248°F 0.85% rH, no condensation IP54 incl. upside-down, class III, indoor use only EN 60730 During operation the actuator will self-adjust according to the closing point of the valve 2 groups: Fixed, 2x2 wires x 0.34 mm², 1.5 meter Fixed, 2x2 wires x AWG22, 4.9 ft Fixed, 2 wires x 0.50 mm², 1.5 meter Fixed, 2 wires x AWG20, 4.9 ft Fixed, 4 wires x 0.50 mm², 1.5 meter Fixed, 4 wires x AWG20, 4.9 ft Twisted pair with shielding (characteristic impedance ~120 Ω) Baud rate dependent: 9600 and 19200 baud rate - max. 1000 meter 38400 and 57600 baud rate - max. 750 meter 115200 baud rate - max. 500 meter Modbus: Transmission type: Interface: Baud rates supported: Start/stop bits: Participants: Load: RTU slave EIA-485 / RS-485 9600, 19200, 38400, 57600 and 115200 8N2 (standard) Up to 32 recommended, max. 64 participants 1/8 unit load BACnet: Protocol: Interface: Device profile: Baud rates supported: Services (BIBBS) supported: Participants: Load: BACnet MS/TP Master EIA-485 / RS-485 BACnet Application Specific Controller (B-ASC) type server 9600, 19200, 38400, 57600 and 115200 DS-RP-B, DS-RPM-B, DS-WP-B, DS-WPM-B, DS-COV-B, DM-DDB-B, DM-DOB-B, DM-DCC-B, DM-TS-B, DM-RD-B and DM-R-B Up to 32 recommended, max. 64 participants 1/8 unit load. Note 2: Including +5°C self-generated heat based on UL requirements. Tech note · FlowCon FN actuators · june 2024 · www.flowcon.com Page 2 of 7
Download PDF file