SPECIFICATIONS FlowCon EV.0.3 / EV.0.3.R Supply voltage: Type: Power consumption: Inrush current: Control signal: Failsafe function: End switch: Operation time: Actuating force: Stroke: Ambient temperature: Protection: Cable: FlowCon EVP.0.3 2 Supply voltage: Type: Power consumption: Inrush current: Control signal: Failsafe function: End switch: Operation time: Actuating force: Stroke: Ambient temperature: Fluid temperature: Protection: CE conformity: Cable: FlowCon EV.0.4 / EV.0.4.R Supply voltage: Type: Power consumption: Inrush current: Control signal: Failsafe function: End switch: Operation time: Actuating force: Stroke: Ambient temperature: Protection: Cable: 230V AC ±10%, 50/60 Hz Thermal 1 W 550mA (peak) ON/OFF Yes, normally closed 3 No Approximately 4 minutes 100N ±5% 5 mm / 0.2 in 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class II Fixed, 2 wires x 0.75 mm 2 , 1 m PVC Fixed, 2 wires x AWG18, 3.3 ft PVC 230V AC ±10%, 50/60 Hz Thermal 2 W 300mA (peak) for max. 200 ms ON/OFF Yes, normally closed 3 No Approximately 3 minutes 100N ±5% 4 mm / 0.16 in 0°C to +60°C / +32°F to +140°F 0°C to +100°C / +32°F to +212°F IP54 including upside-down, class II EN 60730 Fixed, 2 wires x 0.75 mm 2 , 1 m PVC Fixed, 2 wires x AWG18, 3.3 ft PVC 24V AC/DC -10%/+20%, 0-60 Hz Thermal 1 W 300mA (peak) ON/OFF Yes, normally closed 3 No Approximately 4 minutes 100N ±5% 5 mm / 0.2 in 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class III Fixed, 2 wires x 0.75 mm 2 , 1 m PVC Fixed, 2 wires x AWG18, 3.3 ft PVC Note 2: Note 3: Please note that FlowCon EVP.0.3 is marked VM 230V on actuator. To ensure that the valve is in an open position during commissioning of the system, the actuator will be delivered in open position and remain in this position until it is electrically operated first time. Tech note · FlowCon EV actuators · august 2024 · www.flowcon.com Page 2 of 5
Download PDF file