Page number 4

Nominal flow rate Nominal flow rate FlowCon International assumes no responsibility for mistakes, if any, in any printed material. FlowCon E-JUST 15-50 mm (1/2”-2”) 1B95015 - 02/2020 FlowCon E-JUST Insert size: 40 mm · 1 1/2” · Y-type · White pawl ΔP: 17-400 kPaD · 2.5-58 psid l/sec 0.149 0.220 0.289 0.355 0.418 0.479 0.538 0.594 0.647 0.699 0.748 0.795 0.841 0.884 0.925 0.965 1.00 1.04 1.07 1.11 1.14 1.17 1.20 1.23 1.26 1.28 1.31 1.33 1.36 1.38 1.40 1.43 1.45 1.47 1.49 1.51 1.53 1.55 1.58 1.60 1.62 E-JUST2.Y.G l/hr GPM 535 2.36 793 3.49 1040 4.58 1280 5.63 1510 6.63 1730 7.60 1940 8.52 2140 9.41 2330 10.3 2520 11.1 2690 11.9 2860 12.6 3030 13.3 3180 14.0 3330 14.7 3470 15.3 3610 15.9 3740 16.5 3870 17.0 3990 17.6 4100 18.1 4220 18.6 4320 19.0 4420 19.5 4520 19.9 4620 20.3 4710 20.7 4800 21.1 4890 21.5 4970 21.9 5050 22.3 5130 22.6 5210 23.0 5290 23.3 5370 23.6 5440 24.0 5520 24.3 5600 24.6 5670 25.0 5750 25.3 5830 25.7 Setting 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 Accuracy: Greatest of either ±5% of controlled flow rate or ±2% of maximum flow rate FlowCon E-JUST Insert tyrp: 50 mm · 2”· G-type · Grey pawl ΔP: 20-400 kPaD · 2.9-58 psid l/sec 0.883 1.14 1.37 1.59 1.78 1.96 2.13 2.28 2.42 2.54 2.66 2.77 2.86 2.95 3.04 3.12 3.19 3.26 3.32 3.39 3.45 3.51 3.56 3.62 3.67 3.73 3.78 3.83 3.89 3.94 3.99 4.05 4.10 4.15 4.20 4.25 4.30 4.35 4.39 4.44 4.48 E-JUST3.G.B l/hr GPM 3180 14.0 4100 18.0 4940 21.7 5710 25.1 6420 28.3 7070 31.1 7660 33.7 8200 36.1 8700 38.3 9150 40.3 9570 42.1 9960 43.8 10300 45.4 10600 46.8 10900 48.2 11200 49.4 11500 50.6 11700 51.7 12000 52.7 12200 53.7 12400 54.6 12600 55.6 12800 56.5 13000 57.3 13200 58.2 13400 59.1 13600 59.9 13800 60.8 14000 61.6 14200 62.4 14400 63.3 14600 64.1 14800 65.0 14900 65.8 15100 66.6 15300 67.4 15500 68.2 15700 68.9 15800 69.6 16000 70.3 16100 70.9 Setting 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 Accuracy: Greatest of either ±5% of controlled flow rate or ±2% of maximum flow rate Use the FlowCon adjustment key (part number ACC0001) for adjusting the flow rate. A setting of 4.2 corresponds to a flow rate of: 1.45 l/sec (23.0 GPM) for the 40 mm (1 1/2”) insert, range 17-400 kPaD (2.5-58 psid). This paper is a supplement to the FlowCon General Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 4 of 4