SPECIFICATIONS (.continued) FlowCon FT Actuators (Thermal): FlowCon Actuator 3/4 Supply voltage FT.0.2 FT.0.3 24V AC -10%. +20%, 50/60 Hz 230V AC ±10%, 50/60 Hz FT.0.4 24V AC/DC -10%.+20%, 50/60 Hz Type Thermal Thermal Thermal Power consumption 1.2W 1.2W 1.2W Control signal 5 Analog 0-10V ON/OFF ON/OFF Failsafe function Normally closed Normally closed Normally closed Operation time 6 App. 4.5 minutes App. 4.5 minutes App. 4.5 minutes Ambient temperature Protection Cable 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class III Plug-in, 1 m / 3 ft 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class II Fixed, 1 m / 3 ft 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class III Fixed, 1 m / 3 ft Weight 0.12 kg / 0.26 lb 0.11 kg / 0.24 lb 0.11 kg / 0.24 lb Note 3: FlowCon warranty is voided using other actuators than supplied by FlowCon International. Note 4: Please note if mounted on FlowCon Green.2 specified leakage rate to be exceeded. Note 5: To ensure that the valve is in an open position during commissioning, the actuator will be delivered in open position and remain in this position until it is electrically operated first time. Note 6: Closing time is approximately the double dependent on ambient temperature. FlowCon FT.0.2 FlowCon FT.0.3/0.4 FlowCon FN / FNP / FNR Actuators (Gear): FlowCon Actuator 7 FN.0.2 FNP.0.2 FNR.0.2 FNR.0.2-EQ Supply voltage 24V AC/DC ±10%, 50/60 Hz 24V AC/DC ±10%, 50/60 Hz 24V AC/DC ±15%, 50/60 Hz 24V AC/DC ±15%, 50/60 Hz Type Electrical, bi-directional synchronous motor Electrical, bi-directional step motor Power consumption 24V AC: 0.9VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. 24V AC: 0.9VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. 24V AC: 1VA standby / 6VA operating / 6VA max. 24V DC: 0.5W standby / 4W operating / 4W max. 24V AC: 1VA standby / 6VA operating / 6VA max. 24V DC: 0.5W standby / 4W operating / 4W max. Control signal Analog 0(2)-10V DC, <0.5mA Analog 0(2)-10V DC, <0.5mA Analog 0-10V DC, linear Analog 0-10V DC, equal% Feedback Yes, control signal No No No Failsafe function Fail in place Fail in place Fail in place Fail in place Auto stroke Yes Yes No No Operation time max 22 sec/mm max 22 sec/mm max 5.5 sec/mm max 5.5 sec/mm Ambient temperature 0°C to +50°C / +32°F to +122°F 0°C to +50°C / +32°F to +122°F 0°C to +50°C / +32°F to +122°F 0°C to +50°C / +32°F to +122°F Media temperature 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F Humidity rating 0.85% rH, no condensation 0.85% rH, no condensation 0.80% rH, no condensation 0.80% rH, no condensation Protection IP54 including upside-down, class III, indoor use only IP54 including upside-down, class III, indoor use only IP54 including upside-down, class III, indoor use only IP54 including upside-down, class III, indoor use only Cable Fixed 5 x 0.5 mm 2 , 1.5 m / 5 x AWG20, 4.9 ft Fixed 3 x 0.5 mm 2 , 1.5 m / 3 x AWG20, 4.9 ft Fixed 3 x 0.22 mm 2 , 1.5 m / 3 x AWG24, 4.9 ft Fixed 3 x 0.22 mm 2 , 1.5 m / 3 x AWG24, 4.9 ft Closing point adjustment During operation the actuator will self-adjust according to the closing point and stroke length of the valve Weight 0.25 kg / 0.55 lb 0.25 kg / 0.55 lb 0.23 kg / 0.51 lb 0.23 kg / 0.51 lb FlowCon Actuator 7 Supply voltage Type Power consumption Control signal Feedback Failsafe function Auto stroke Operation time Ambient temperature Media temperature Humidity rating Protection Cable FNR.0.3 110/230V AC ±10%, 50/60 Hz Electrical, bi-directional step motor 1VA standby / 6VA operating / 8VA max. Digital 2-position / 3-point floating No Fail in place No 27.2 sec/mm 0°C to +50°C / +32°F to +122°F 0°C to +120°C / +32°F to +122°F 0.80% rH, no condensation IP54 including upside-down, class II, indoor use only Fixed 3 x 0.5 mm 2 , 1.5 m / 3 x AWG20, 4.9 ft FN.0.4 24V AC/DC ±10%, 50/60 Hz Electrical, bi-directional synchronous motor 24V AC: 0.9 VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. Digital 2-position / 3-point floating No Fail in place Yes max 22 sec/mm Reaction time: 0.8 sec 0°C to +50°C / +32°F to +122°F 0°C to +120°C / +32°F to +248°F 0.85% rH, no condensation IP54 including upside-down, class III, indoor use only Fixed 3 x 0.5 mm 2 , 1.5 m / 3 x AWG20, 4.9 ft Closing point adjustment During operation the actuator will self-adjust according to the closing point and stroke length of the valve Weight 0.23 kg / 0.51 lb 0.25 kg / 0.55 lb Note 7: FlowCon warranty is voided using other actuators than supplied by FlowCon International. M30 x 1,5 FlowCon FN.0.2/0.4 and FNP.0.2 M30 x 1,5 FlowCon FNR.0.x Tech note · FlowCon Green.0/1/2 · march 2024 · www.flowcon.com Page 2 of 10 FT.0.2 APV 40625-20 24 V AC 0-10 V DC R E =100kΩ 1403 Made in Germany FT.0.3 A 20625-00 230 V NC 1,2 W 1403 Made in Germany
Download PDF file