SPECIFICATIONS FlowCon FT Actuators (Thermal): FlowCon Actuator 3/4 FT.0.2 FT.0.3 FT.0.4 Supply voltage 24V AC -10%. +20%, 50/60 Hz 230V AC ±10%, 50/60 Hz 24V AC/DC -10%.+20%, 50/60 Hz APVF4 24 0-10 Type Thermal Thermal Thermal R E = Power consumption 1.2W 1.2W 1.2W Made in Control signal Analog 0-10V ON/OFF ON/OFF Failsafe function 5 Operation time 6 Ambient temperature Normally closed App. 4.5 minutes 0°C to +60°C / +32°F to +140°F Normally closed App. 4.5 minutes 0°C to +60°C / +32°F to +140°F Normally closed App. 4.5 minutes 0°C to +60°C / +32°F to +140°F FlowCon FT.0.2 Valve adaptor, black Protection IP54 including upside-down, class III IP54 including upside-down, class II IP54 including upside-down, class III Cable Weight 7 Plug-in, 1 m / 3 ft 0.12 kg / 0.26 lb Fixed, 1 m / 3 ft 0.11 kg / 0.24 lb Fixed, 1 m / 3 ft 0.11 kg / 0.24 lb Note 3: Note 4: Note 5: Note 6: Note 7: FlowCon warranty is voided using other actuators than supplied by FlowCon International. Please note if mounted on FlowCon Green.2 specified leakage rate to be exceeded. To ensure that the valve is in an open position during commissioning, the actuator will be delivered in open position and remain in this position until it is electrically operated first time. Closing time is approximately the double dependent on ambient temperature. Weight includes actuator, adaptor ring and 1 meter cable. FlowCon FN / FNP / FNR Actuators (Gear): FlowCon FT.0.3/0.4 Valve adaptor, black FT.0.3 A 20625-00 230 V NC 1,2 140 Made in German FlowCon Actuator 8 Supply voltage Type Power consumption Control signal Feedback Failsafe function Auto stroke Operation time Ambient temperature Media temperature Humidity rating Protection Cable Closing point adjustment Weight FN.0.2 FNP.0.2 FNR.0.2 FNR.0.2-EQ 24V AC/DC ±10%, 50/60 Hz 24V AC/DC ±10%, 50/60 Hz 24V AC/DC ±15%, 50/60 Hz 24V AC/DC ±15%, 50/60 Hz Electrical, bi-directional synchronous motor Electrical, bi-directional step motor 24V AC: 0.9VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. 24V AC: 0.9VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. 24V AC: 1VA standby / 6VA operating / 6VA max. 24V DC: 0.5W standby / 4W operating / 4W max. 24V AC: 1VA standby / 6VA operating / 6VA max. 24V DC: 0.5W standby / 4W operating / 4W max. Analog 0(2)-10V DC, <0.5mA Analog 0(2)-10V DC, <0.5mA Analog 0-10V DC, linear Analog 0-10V DC, equal% Yes, control signal No No No Fail in place Fail in place Fail in place Fail in place Yes Yes No No Max 22 sec/mm Max 22 sec/mm Max 5.5 sec/mm Max 5.5 sec/mm 0°C to +50°C / +32°F to +122°F 0°C to +50°C / +32°F to +122°F 0°C to +50°C / +32°F to +122°F 0°C to +50°C / +32°F to +122°F 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F 0.85% rH, no condensation 0.85% rH, no condensation 0.80% rH, no condensation 0.80% rH, no condensation IP54 including upside-down, class III, indoor use only Fixed 5 x 0.5 mm 2 , 1.5 m / 5 x AWG20, 4.9 ft IP54 including upside-down, class III, indoor use only Fixed 3 x 0.5 mm 2 , 1.5 m / 3 x AWG20, 4.9 ft IP54 including upside-down, class III, indoor use only Fixed 3 x 0.20 mm 2 , 1.5 m / 3 x AWG24, 4.9 ft IP54 including upside-down, class III, indoor use only Fixed 3 x 0.20 mm 2 , 1.5 m / 3 x AWG24, 4.9 ft During operation the actuator will self-adjust according to the closing point and stroke length of the valve 0.25 kg / 0.55 lb 0.25 kg / 0.55 lb 0.23 kg / 0.51 lb 0.23 kg / 0.51 lb FlowCon Actuator 8 FNR.0.3 FN.0.4 Supply voltage Type Power consumption 110/230V AC ±10%, 50/60 Hz Electrical, bi-directional step motor 1VA standby / 6VA operating / 8VA max. 24V AC/DC ±10%, 50/60 Hz Electrical, bi-directional synchronous motor 24V AC: 0.9 VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. Control signal Feedback Digital 2-position / 3-point floating No Digital 2-position / 3-point floating No Failsafe function Fail in place Fail in place Auto stroke Operation time Ambient temperature No Max 27.2 sec/mm 0°C to +50°C / +32°F to +122°F Yes Max 22 sec/mm Reaction time: 0.8 sec 0°C to +50°C / +32°F to +122°F Media temperature 0°C to +120°C / +32°F to +248°F 0°C to +120°C / +32°F to +248°F Humidity rating 0.80% rH, no condensation 0.85% rH, no condensation Protection IP54 including upside-down, class II, indoor use only IP54 including upside-down, class III, indoor use only Cable Fixed 3 x 0.5 mm 2 , 1.5 m / 3 x AWG20, 4.9 ft Fixed 3 x 0.5 mm 2 , 1.5 m / 3 x AWG20, 4.9 ft Closing point adjustment During operation the actuator will self-adjust according to the closing point and stroke length of the valve Weight 0.23 kg / 0.51 lb 0.25 kg / 0.55 lb Note 8: FlowCon warranty is voided using other actuators than supplied by FlowCon International. Tech note · FlowCon Green.0/1/2 · may 2025 · www.flowcon.com M30 x 1,5 FlowCon FN and FNP M30 x 1,5 FlowCon FNR Page 3 of 11
Download PDF file