FlowCon Green.0 / Green.1 / Green.2 Pressure Independent Control Valves DN15-40 / 1/2”-1 1/2” SPECIFICATIONS Insert: Static pressure: Ambient temperature: Media temperature 1 : Material: - Insert: - Metal components (internal): - O-rings: - Cone: - Diaphragm: - Head nut: Stroke: Maximum close off pressure: Maximum operational Δ P: Control characteristic: Control range: Rangeability: Turn down ratio: Shut-off leakage: Flow rate range: Valve: Material: - Housing: - Ball valve: End connections 2 : Housing taps: 2500 kPa / 360 psi +1°C to +50°C / +34°F to +122°F -20°C to +120°C / -4°F to +248°F Glass-reinforced PSU/POM/PPS Stainless steel EPDM PPS 20 mm / 3/4” insert: EPDM 40 mm / 1 1/2” insert: Hydrogenated acrylonitrile-butadiene-rubber Forged brass ASTM CuZn40Pb2 20 mm / 3/4” insert: 3.4 mm / 0.13 in 40 mm / 1 1/2” insert: 5.2 mm / 0.2 in 800 kPa / 116 psi 800 kPaD / 116 psid linear (may be converted to equal % on actuator) 1:1000 / IEC 60534 100:1 100:1 ANSI / FCI 70-2 2006, Class IV / IEC 60534-4, Class IV 20 mm / 3/4” insert: 0.0103-0.736 l/sec / 0.163-11.7 GPM 40 mm / 1 1/2” insert: 0.240-1.29 l/sec / 3.81-20.4 GPM Forged brass ASTM CuZn40Pb2 or DZR ASTM CuZn36Pb2As ABV: Chemically nickel-plated brass ball A/AB: Fixed female ISO or NPT ABV: Union end connection in brass alloy ISO or NPT AB/ABV: 1/4” ISO. Note 1: Stated temperature rating is defined due to no external insert condensation. Note 2: NPT only available ex. US-factory. Tech note · march 2024 · www.flowcon.com Page 1 of 10
Download PDF file