SPECIFICATIONS FlowCon FT.0.3 Supply voltage: Type: Power consumption: Inrush current: Control signal: Failsafe function: End switch: Operation time: Actuating force: Stroke: Ambient temperature: Protection: Cable: FlowCon FT.0.4 Supply voltage: Type: Power consumption: Inrush current: Control signal: Failsafe function: End switch: Operation time: Actuating force: Stroke: Ambient temperature: Protection: Cable: 230V AC ±10%, 50/60 Hz Thermal 1.2W <550mA (peak) for max. 100 msec ON/OFF Yes, normally closed 3 No Approximately 4.5 minutes 4 125N ±5% 6.5 mm / 0.26 in 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class II Fixed, 2 wires x 0.75 mm 2 , 1 m PVC Fixed, 2 wires x AWG18, 3.3 ft. PVC 24V AC/DC -10%/+20%, 50/60 Hz Thermal 1.2W <300mA (peak) for max. 2 minutes ON/OFF Yes, normally closed 3 No Approximately 4.5 minutes 4 125N ±5% 6.5 mm / 0.26 in 0°C to +60°C / +32°F to +140°F IP54 including upside-down, class III Fixed, 2 wires x 0.75 mm 2 , 1 m PVC Fixed, 2 wires x AWG18, 3.3 ft PVC Note 3: Note 4: To ensure that the valve is in an open position during commissioning of the system, the actuator will be delivered in open position and remain in this position until it is electrically operated first time. Closing time is approximately the double dependent on ambient temperature. Tech note · FlowCon FT actuators · april 2026 · www.flowcon.com Page 2 of 4
Download PDF file