FlowCon FNR Actuators FlowCon Electrical Actuators SPECIFICATIONS FlowCon FNR.0.2 Supply voltage: Type: Power consumption: Inrush current: Control signal: Resolution: Feedback: Control mode: Failsafe function: Manual override: Position indicator: Operation time: Actuating force: Stroke: Ambient temperature: Media temperature: Humidity rating: Protection: CE conformity: Cable: Closing point adjustment: 24V AC/DC ±15%, 50/60 Hz Electrical, bi-directional step motor 24V AC: 1VA standby / 6VA operating / 6VA max. 24V DC: 0.5W standby / 4W operating / 4W max. 1.8A (peak) Analog 0-10V DC 1:100 No Linear Fail in place Yes. 4 mm (~5/32”) Allen Key Yes 5.5 sec/mm 200N (-30N/+70N) 1-8.5 mm / 0.04-0.33 in (auto adjusting) 0°C to +50°C / +32°F to +122°F 0°C to +120°C / +32°F to +248°F 0.80% rH, no condensation IP54, class III, including upside-down, indoor use only EN 60730 Fixed, 3 wires x 0.22 mm 2 , 1.5 meter Fixed, 3 wires x AWG24, 4.9 ft During operation the actuator will self-adjust according to the closing point and stroke length of the valve. Tech note · may 2022 · www.flowcon.com Page 1 of 3
Download PDF file