SPECIFICATIONS (.continued) FlowCon FN.0.4 Supply voltage: Type: Power consumption: Inrush current: Control signal: Feedback: Failsafe function: Electrical override: Position indicator: Operation time: Reaction time: Actuating force: Stroke: Ambient temperature 3 : Media temperature: Humidity rating: Protection: CE conformity: Cable: Closing point adjustment: 24V AC/DC ±10%, 50/60 Hz Electrical, bi-directional synchronous motor 24V AC: 0.9 VA standby / 2.5VA operating / 4.7VA max. 24V DC: 0.75W standby / 1.2W operating / 2.2W max. 10A (peak) Digital 3-point floating and ON/OFF No Fail in place Yes Yes 22 sec/mm 0.8 sec High (250N -30N/+70N) 5.8 mm / 0.23 in (compensated) 0°C to +50°C / +32°F to +122°F 0°C to +120°C / +32°F to +248°F 0.85% rH, no condensation IP54 incl. upside-down, class III, indoor use only EN 60730 Fixed, 3 wires x 0.50 mm 2 , 1.5 meter Fixed, 3 wires x AWG20, 4.9 ft During operation the actuator will self-adjust according to the closing point and stroke length of the valve. FlowCon FN.5.4 Supply voltage: Type: Power consumption: Control signal: Feedback: Failsafe function: Operation time: Actuating force: Ambient temperature: Humidity rating: Protection: Cable: Closing point adjustment: 24V AC/DC ±10%, 50/60 Hz Electrical, bi-directional synchronous motor 5VA Digital (2-position / 3-point-floating) No Fail in place 50 Hz: 18.5 sec/mm Low (120N -10N/+10N) +2°C to +50°C / +36°F to +122°F <95% rH, no condensation IP54, class II Fixed, 3 wires x 0.30 mm 2 halogen free, 1 m Fixed, 3 wires x AWG22 halogen free, 3 ft During operation the actuator will self-adjust according to the closing point of the valve. Note 3: Including +5°C self-generated heat based on UL requirements. Tech note · FlowCon FN actuators · january 2024 · www.flowcon.com Page 3 of 8
Download PDF file