SPECIFICATIONS FlowCon PICV actuator 2 FlowCon SM.0.0.1.3 (standard) FlowCon SM.0.0.1.4 (standard failsafe) FlowCon SM.0.0.0.6 (BACnet failsafe) Supply voltage: • SM.0.0.1.3/4: • SM.0.0.0.6: Type: Power consumption: • SM.0.0.1.3: • SM.0.0.1.4: • SM.0.0.0.6 Control signal: Resolution: Feedback: Control mode: Supply voltage failsafe: • SM.0.0.1.3: • SM.0.0.1.4: • SM.0.0.0.6: Control signal failsafe: • SM.0.0.1.3/4: Manuel override: Position indicator: Operation time: • FlowCon valve SM.3-5: • FlowCon valve SM.6: Actuating force: • SM.0.0.1.3/4: • SM.0.0.0.6: Stroke: • FlowCon valve SM.3-5: • FlowCon valve SM.6: Ambient temperature: Humidity rating: Protection: CE conformity: Calibration: Cable: • SM.0.0.1.3/4: • SM.0.0.0.6: Material: • Cover, top: • Cover, bottom: • Spindle adaptor: Valve-actuator coupling: Programming: • SM.0.0.1.3/4: • SM.0.0.0.6: 24V AC ±20%, 50/60 Hz or 24V DC ±20% 22-26V AC, 50/60 Hz or 22-26V DC Electrical, Bi-directional synchronous motor 24V AC: 2.2VA standby / 3.8VA operating / 15VA max 24V DC: 1.0W standby / 1.7W operating / 8.0W max 24V AC: 3.3VA standby / 4.5VA operating / 15VA max 24V DC: 2.0W standby / 3.0W operating / 8.0W max 22-26V AC: 3.5VA standby / 5.0VA operating / 12VA max Analog 2-10V DC 1:800 (2-10V analog) Linear flow Auto (equal to analog control signal) or 2-10V DC Linear flow Fail in place Fail in place or settable 0-100% open Optional open or close Fail in place or settable 0-100% open Yes No 190 sec (from closed to fully open valve) 317 sec (from closed to fully open valve) 9 Nm opening / 7.5 Nm closing 8 Nm opening / 7.0 Nm closing 2160° 3600° -10°C to +50°C / +14°F to +122°F 5.95% rH, no condensation IP54 including upside-down mounting EN 60730, class II Automatic at startup Fixed, 5 wires x 0.75 mm 2 / AWG18, halogen free, 1 meter / 3 ft Fixed, 5 wires x 0.75 mm 2 / AWG18, halogen free, 1 meter / 3 ft Fixed, 3 wires x 0.75 mm 2 / AWG18, halogen free, 1 meter / 3 ft (BACnet) PA (glass-reinforced), UL94, V0 rated PC (glass-reinforced), UL94, V0 rated Brass and EPDM Easy snap coupling Programming of all settings on interface with buttons and display Programming of all settings on interface with buttons and display or via BACnet Note 2: FlowCon warranty is voided using other actuators than supplied or recommended by FlowCon International. Tech note · FlowCon FIT DN15-40 / 1/2”-1 1/2” · november 2025 · www.flowcon.com Page 4 of 14
Download PDF file
Table of contents