FlowCon FH Actuators FlowCon Electrical Actuators SPECIFICATIONS FlowCon FH Supply voltage: Type: Power consumption: Inrush current: Control signal: Resolution: Feedback: Failsafe function: Manual override: Position indicator: Operation time: Actuating force: Stroke: Ambient temperature1: Media temperature: Humidity rating: Protection: CE conformity: Cable: Closing point adjustment: 24V AC/DC ±10%, 50/60 Hz Electrical, bi-directional synchronous motor 24V AC: 1.5VA standby / 6VA operating / 8.5VA max. 24V DC: 0.6W standby / 2.6W operating / 4.1W max. 10A (peak) Analog 0(2)-10V DC, <0.5mA or digital 3-point floating and ON/OFF 1:100 (0-10V analog) and 1:80 (2-10V analog) Yes, control signal (analog) or 0-10V DC (digital ON/OFF) Fail in place Yes Yes 22 sec/mm 450N -100N/+150N 7 mm / 0.276 in 0°C to +50°C / +32°F to +122°F 0°C to +120°C / +32°F to +248°F 0.85% rH, no condensation IP54 incl. upside-down, class III, indoor use only EN 60730 Fixed, 5 wires x 0.50 mm 2 , 1.5 meter Fixed, 5 wires x AWG20, 4.9 ft During operation the actuator will self-adjust according to the closing point and stroke length of the valve. Note 1: Including +5°C self-generated heat based on UL requirements. Tech note · september 2024 · www.flowcon.com Page 1 of 6
Download PDF file