FlowCon SM with BACnet actuator 1B95082 - 04/2020 Addition to Installation and Operation Instruction The actuator types FlowCon SM.0.0.0.5 and FlowCon SM.0.0.0.6 are electrical programmable actuators with BACnet. The BACnet PICS document can be found on the FlowCon website, www.flowcon.com. For fitting / re-fitting and orientation, see SM instruction. Wiring Instructions for BACnet connection SM.0.0.0.5/6 Actuator BACnet Black Red White A+ B- Signal ground Start-up Sequence At first start-up please enter programming menu to set steps 14-18 according to the BACnet system settings. The device instance set in step 17 must be unique to the network. Remaining setup options, steps 0-13 can be programmed through BACnet connection. Programming menu (continued) The programming menu is always accessible. To enter the programming menu, simultaneously press and for 6 seconds, until bottom line in display blinks. For fast menu exit press and simultaneously for 6 seconds. The actuator will automatically return to normal operation mode if no action is detected on arrow keys for 1 minute. To change a value, press or . For quick scroll through values hold down or . Press to accept a value and go to next step and press to go to previous step. All values selected in the programming menu are stored in non-volatile memory. Step Display Description Values 14 * Select communication speed. *scrolling top: select baud rate Default: 9600. Options: 9600, 19200, 38400, 76800. 15 * Select MAC address. *scrolling top: select mac address Default: 000. Options: 000-254. 16 * 17 * 18 * out of 15 Change of device instance. *scrolling top: change device instanc Select device instance. *scrolling top: select device instanc Select out-of-service time-out. *scrolling top: out of service in min Default: NO. Options: YES or NO. Device instance is changed in step 16. Default: 0497000. Change one digit at a time. Press and to move between digits. Default: 15. Options: 1-60. Please re-start actuator for changes to take effect. This paper is a supplement to the FlowCon SM Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 1 of 4
Share
Print
Download PDF file
