FlowCon K DN15-80 (1/2”-3”) 1K95000 - 02/2022 Assembly drawing FlowCon K: D2 A: Valve housing D1 B: Stainless steel insert C: Cap incl. o-ring D1: P/t plug (2 pcs.) D2: Plug and gasket (2 of each) E: O-ring (only 3/4”, 1½” and 3” cart.) C D1 D2 B E A General It is recommended flushing the system before installing the insert in the valve body. Suitable flushing caps are available. Water must always be suitable treated, clean and free of debris. It is recommended that a strainer be installed prior to the valve body to prevent damage or blockage due to debris. Warranty obligation Failure to abide by all recommendations as per this installation and operation instruction will void warranty. For latest updates pls. see www.flowcon.com Stainless Steel Insert for DN15/20/25, 1/2”-1” (3/4” insert) l/sec l/hr 0.0210 0.0315 0.0347 0.0421 0.0473 0.0631 0.0694 0.0841 0.0946 0.105 0.126 0.147 0.158 0.168 0.189 0.210 0.221 0.252 0.294 0.315 0.336 0.379 0.421 0.442 0.505 0.589 0.631 0.757 0.883 1.01 75.7 114 125 151 170 227 250 303 341 379 454 530 568 606 681 757 795 908 1060 1140 1210 1360 1510 1590 1820 2120 2270 2730 3180 3630 GPM 0.333 0.500 0.550 0.667 0.750 1.00 1.10 1.33 1.50 1.67 2.00 2.33 2.50 2.67 3.00 3.33 3.50 4.00 4.67 5.00 5.33 6.00 6.67 7.00 8.00 9.33 10.0 12.0 14.0 16.0 Type 1 10-95 kPaD F360111 F360101 F360102 F360103 F360104 F360105 F360106 F360107 F360108 F360110 F360112 F360114 F360116 Type 2 22-210 kPaD F360211 F360201 F360202 F360203 F360204 F360205 F360206 F360207 F360208 F360210 F360212 F360214 F360216 Type 4 40-390 kPaD F360411 F360401 F360402 F360403 F360404 F360405 F360406 F360407 F360408 F360410 F360412 F360414 F360416 Type 8 90-880 kPaD F360811 F360801 F360802 F360803 F360804 F360805 F360806 F360807 F360808 F360810 F360812 F360814 F360816 Accuracy ±5% This paper is a supplement to the FlowCon General Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 2 of 4
Share
Print
Download PDF file
