FlowCon FN.5.4 actuator ELECTRICAL ACTUATORS Actuator wiring The wiring diagrams for FlowCon FN.5.4 is shown in figure 5-8. FlowCon FN.5.4 Actuator FN.0.4 / 5.4 Actuator 2-Position, Normally Closed White Black Dip switch settings Lift the silicone cap on the back of the actuator to get access to the dip switches (figure 9). Red Figure 9: Dip switch factory settings (ON-OFF). Close Open Power 24V AC/DC Ground/common Dip switch no. 1- Rotation direction: OFF - Normally open. ON - Normally closed. Dip switch no. 2 - NA: This dip switch is not in use. Figure 5 2-position, NC FlowCon FN.5.4 Actuator FN.0.4 / 5.4 Actuator 2-Position, Normally Open White Black Removing actuator / Manual override operation Open Close Power 24V AC/DC Ground/common To disengage the actuator or perform manual override, please turn off the power supply and press the release button while turning the top part of the actuator counter clockwise 30° (figure 2, previous page). The piping network can now be tested if necessary by manually adjusting the valve adaptor knob. IMPORTANT: FlowCon FN.5.4 actuator and FN.5.4 valve adaptor are not custom made as a pair from the supplier, which means that a FN.5.4 actuator can be used with any FN.5.4 valve adaptor. Using other models of valve adaptors may cause valve damage. Figure 6 2-position, NO FlowCon FN.5.4 Actuator FN.0.4 / 5.4 Actuator 3-Point-Floating, Normally Closed White Open Power 24V AC/DC Ground/common Black Red Close Red Stop Figure 7 3-point-floating, NC FlowCon FN.5.4 Actuator FN.0.4 / 5.4 Actuator 3-Point-Floating, Normally Open White Black Warranty obligation Failure to abide by all recommendations as per this installation and operation instruction will void warranty. For latest updates pls. see www.flowcon.com Power 24V AC/DC Ground/common Red Open Stop Close Figure 8 3-point-floating, NC Denmark Dubai USA Singapore -2- FlowCon International assumes no responsibility for mistakes, if any, in any printed material. www.flowcon.com 1B95077 - 04/2016
Download PDF file