FlowCon FAC6HP with optional software COMMISSIONING METER ADDITION TO INSTALLATION AND OPERATION INSTRUCTION FlowCon FAC6HP with optional software Please see operation instruction for FlowCon FAC6HP (1F95600) to learn how the commission- ing meter is connected to a valve and how to mea- sure relevant values. Installing the software The software can be installed on Windows XP/- Vista/7 operating systems. Install the software thus: 1. Install the drivers for the FlowCon FAC6HP: 1.a. Insert the CD in a CD drive of a computer (not supplied by FlowCon), and if prompted to, choose not to install the program. 1.b. Open the folder “cp210x” (to find the folder choose to “explore” the CD) and start the program inside this folder. 1.c. Please follow the steps on the screen to complete the installation and launch the program. 1.d. Click “Install” on the pop up window “Silicon Laboratories CP210x USB to UART Bridge Driver Installer” when prompted. 2. Install the software for the FlowCon FAC6HP: 2.a. Go to the root folder of the CD and start the program “setup.exe”. If prompted, choose to trust / install it (PcomPRO). 2.b. At the end of the installation (when the pro- gram PcomPRO is first started), you will be asked to connect a FAC6HP to the computer. Please turn on the FAC6HP (by pressing any button), then connect the computer and FAC6HP with the USB cable. The USB port on the FAC6HP is located inside the battery box at the back of the device inside the rubber cover. 3. Import a valve list: 3.a. When a new FAC6HP is connected to the computer, the program will prompt a need to create a reference file for that particular FAC6HP (the program will idetify each FAC6HP from its serial number). Please accept the creation of the reference file and await the process (this usually takes 4-5 minutes). It is not necessary to have a FAC6HP connected to the computer all the time working with the software. However the list of available valves will be imported from the FAC6HP and thus it is important to connect it initially. The program will wish to import the valve list from each commissioning meter connected and by de- fault only use valves for projects intended for a spe- cific commissioning meter included in the list from that particular device. Creating and editing projects The quick start offers either import of the current project on any connected FAC6HP, creation of a new project or opening a recent project located in the program’s default folder. When creating or edit- ing any project, the program window is by default divided into 3 main parts, please see figure 1. The buttons will be explained if the mouse is kept over the button, besides table 1 consists of a total list of buttons. Please start all new projects by choosing the units that you wish to use for that project (see the upper left part of figure 1). After choosing the units, the setup of the project should be defined in the project tree. The project tree is shown in the middle part of the screen Denmark Dubai -1- USA Singapore www.flowcon.com 1F95610 - 04/2016 FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
Download PDF file