FlowCon T Actuators FlowCon Electrical Actuators SPECIFICATIONS FlowCon T.0.2 Supply voltage: Type: Power consumption: Impulse voltage: Impedance (input): Control signal: Feedback: Failsafe function: Auxiliary switches: Auxiliary switch rating: Auxiliary switch impulse Manual override: Position indicator: Operation time: Actuating force: Angle of rotation: Direction of rotation: Ambient temperature: Humidity rating: Protection: voltage: CE conformity: Cable: 22-26V AC, 50/60 Hz or 28-32V DC Electrical, bi-directional motor 8VA 330V 100k Ω Analog (0)2-10V DC or 4-20mA Analog (0)2-10V DC or 4-20mA Fail in place Optional (as plug on module) 3A resistive, 250V AC 4000V Yes (do not press clutch, when actuator is powered) Yes 85-90 sec torque dependent 20 Nm at rated voltage 0 to 90°, mechanically adjustable Clockwise (CW) (optional counter clockwise (CCW) via DIP switch) -30°C to +50°C (-22°F to +122°F) 5.95% rH, no condensation Standard: IP22 (NEMA 2), indoor use only Optional watertight bushings: IP54 (NEMA 3R), indoor use only Yes Not included; recommendation 0.75 mm 2 / AWG18 Tech note · january 2025 · www.flowcon.com Page 1 of 5
下载PDF文件