All technical details may be subject to change without notice. We do not accept liability for printing mistakes or omissions. Quality Management System ISO 9001 Environmental Management ISO 14001 Energy Management System ISO 50001 Occupational Health and Safety Management System ISO 45001 MKT was founded in 1990 as a manufacturer of high-quality, interna- tionally approved fastening systems. In the year 1996 the Quality ma- nagement system according to ISO 9001 was certied and in the years 2014 and 2015 the environmental management system according to ISO 14001 was added, the energy management system according to ISO 50001 and the occupational health and safety management sys- tem according to OHSAS 18001 were established. In addition to the standard product oering found in our catalog, MKT also supplies anchor sizes and special designs, such as custom solu- tions for tunnel construction as well as stainless steel anchors made from the materials 1.4529, 1.4571 and 1.4462 and some products with fractional thread. MKT provides customer service on all technical questions. NEW: Wedge Anchor B The Wedge Anchor B has been extended by a third anchorage depth. This means that the proven Wedge Anchor can withstand higher loads and can be used more flexibly. Hollow Core Anchor Easy A4 The new Easy A4 now also allows fastening in pre-stressed hollow concrete slabs, in damp rooms and in outdoor atmospheres. Concrete screw BSZ / BSZ A4 The revision of ETA-16/0204 extends the use of concrete screws un- der seismic action C1 to reduced screw-in depths in cracked and non- cracked concrete. The concrete screws BSZ-SU Ø10-Ø14 can now also be used multiple times for temporary fixings. Injection System VMH The VMH injection system has been supplemented by the European Technical Assessment for the post-installed reinforcement connection. Injection System VME plus The new injection system VME plus is a slow-curing injection system for fixings in cracked and non-cracked concrete and for subsequent reinforcement connections. Compared to the VME injection system, the performance has been improved. The new 440 ml cartridge size (VME plus 440) can be used with all MKT squeeze guns that are suita- ble for 585 ml cartridges. Chemical anchor VZ The new, MKT-developed chemical anchor VZ is a styrene-free Resin An- chor Capsule system with European Technical Assessment for cracked and non-cracked concrete. Its usability from -20 °C to +40 °C concrete temperature enables almost year-round use worldwide, in interior and exterior applications . The fast curing times reduce the waiting time until assembly to a minimum. Threaded Stud VMU-A hot dip gal. The most common dimensions of the VMU-A anchor rods can now be also be supplied from stock in hot-dip galvanized version. Revision of the chemical anchor systems catalog chapter The section on chemical anchor systems has been completely revised. For example, the accessories required for approval-complient proces- sing of anchor rods, sieve sleeves and tie rods have been combined in a separate section. The required accessories can be quickly determined by means of overview tables for the injection systems.
Download PDF fil
Filer