The HTH kitchen range is designed based on a single essential concept: Versatility We have created a kitchen system, whose functions and design are second to none. We have future-proofed the new HTH kitchen and used only the future European standard dimensions. Fortunately, each one of us is unique. HTH has a department that is dedicated to making customised solutions to meet individual wishes and requirements. HTH showcase doors Showcase cabinets for selected models are supplied with a frame that depends on the choice of front, which matches your kitchen doors. Alternatively, you can choose a 2.1 cm thick showcase door with an aluminium frame and clear glass, or with a black lacquered aluminium frame and clear glass or fluted clear glass. HTH drawers, trays, wire trays and wire baskets HTH Meta drawers have single metal sides and a sturdy 1.6 cm base. All Meta dra- wers are supplied with factory-tested rol- lers on metal tracks with pull-out stops. Drawers are approved to carry up to 25 kg, including the weight of the drawer. HTH Lux drawers have double metal sides and a sturdy 1.6 cm base. Lux drawers are always supplied with full travel. Soft-push closure is available at an extra charge. The drawers are approved to carry up to 30 kg (100 cm drawer is approved for 50 kg), including the weight of the drawer. HTH Lux pull-out trays have double metal sides and a sturdy 1.6 cm bottom. Lux trays are always supplied with full travel and soft push closure. Drawers are approved to carry up to 30 kg, including the weight of the drawer. The HTH V8 drawer has 0.80 cm dou- ble-sided metal sides in an anthracite grey colour. The base is 1.6 cm thick. V8 draw- ers are always supplied with full travel and soft closure. For an extra charge, the drawers can also be supplied with soft push opening function. Drawers are approved to carry up to 40 kg, including the weight of the drawer. (70-100 cm drawer is approved for 60 kg), V8 interior trays are also made of double-sided metal with a 1.6 cm bottom. The trays are always supplied with full travel and soft push closure. The trays can be loaded with 40 kg, including the tray weight. HTH’s Nordic Creation drawers are made of solid oak and assembled using finger joints, and have bottoms coated with oak veneer. Nordic Creation drawers are always supplied with full pull-out and soft close. The drawers are approved for 30 kg (80 cm drawer is approved for 50 kg), including the weight of the drawer. HTH wire trays and baskets are made of hard-wearing silver-painted metal. All wire trays and baskets have full roller travel with pull-out stops. HTH wire trays are suitable for use in base units. HTH wire baskets are suitable for use in tall units. HTH unit carcase HTH carcases are thoroughly tried and tested. Made of 1.6 cm chipboard and cov- ered with hard-wearing, easy to clean and eco-friendly melamine. There are combination holes at 3.2 cm intervals in all tall and base units, giving you the freedom to position shelves and other fittings more or less where you like. For cosmetic reasons, the number of com- bination holes in wall units and showcases is reduced to a minimum. Carcases are also available with melamine, laminate, painted or vertically veneered sides corresponding to HTH’s complete front range. Units are supplied as standard with a rear panel made of lacquered 3.0 mm fibreboard. Painted and veneered car- case units are supplied with a rear panel that is painted or has a wood structure. Front edges are always supplied in hard-wearing ABS plastic. All board materials used in HTH kitchens meet Scandinavian and German environ- mental requirements. HTH plinths HTH supplies plinths in various versions: melamine, laminate, aluminium look, painted and veneered. HTH plinths are available in two standard heights: 16.6 cm and 29.4 cm. Plinth sec- tions are supplied as ready-to-fit elements with a front and rear plinth section or for fitting with plinth legs. Plinth drawers of height 16.6 cm are avail- able for all plinth variants. HTH function When we developed the HTH range of kitchen units, we chose to focus on how they would be used on a daily basis. We use only the market’s best mechanical fit- tings in our kitchen units. And we only use suppliers who can document that the goods are safe and resistant to ordinary wear-and-tear and loads. HTH kitchen units have self-closing clip-on hinges with integrated soft close that open wide – to 107°. The hinges are efficient and make it easy to remove and replace doors without using tools. The hinges are adjustable in three directions. We use only thoroughly tried and tested materials in our drawer rails, roller pull- outs and other kitchen fittings. 3
Download PDF fil
Cookiepolitik