Page number 10

3.10 Rev. 4-01 Shaded area indicates changes MUELLER ® CL-12™ DRILLING MACHINE REPAIR PARTS NOTE: These illustrations are for parts identification only. DO NOT use these illustrations for assembly or disassembly of machine. Mueller Co. offers a machine repair service. Contact Mueller ® Customer Service Center for details. Item No. 1 2 3 4 5 6 7 Part Number 46255 40136 40137 863391 40177 40004 40139 Part Name Nut* Ratchet handle plate Ratchet wheel Handle extension Handle bar Ratchet dog Stud Item No. 8 9 10 11 12 13 14 Part Number 85308 58196 40140 40138 40007 40006 96536 Part Name Ratchet complete Wrench Dowel pin Bolt* Spring Spring pin Wrench Item No. 15 16 17 18 19 20 - Part Number 48309 88366 90409 99803 90325 90322 - Part Name Wrench Cutting grease Screw driver Allen wrench Allen wrench Allen wrench - *Order both parts when replacing either one. TO ORDER SPECIFY QUANTITY, PART NUMBER AND PART NAME (include catalog number and model number of machine).

Page number 11

MUELLER ® C1-36-99002 DRILLING MACHINE 3.11 Shaded area indicates change Rev. 10-16 Mueller ® C1-36-99002 Drilling Machine - for drilling operations under pressure - 1-1/2" to 18-1/2" inclusive ❏ Catalog number C1-36-99002 (part number 39262) ❏ Hand or power operation ❏ Designed for use on pressurized or dry mains ❏ Used to cut 1-1/2" to 18-1/2" holes ❏ 36" (914 mm) boring bar travel ❏ Use on cast iron or ductile iron pipe • cement lined cast iron or ductile iron pipe • A-C pipe • concrete pipe • steel pipe ❏ Will make cuts through tapping valves from 2" to 24" ❏ Feed over-travel feature prevents damage to equipment ❏ 500 psig (3450 kPa/35 barg) maximum working pressure at 100 F (38 C) ❏ 500 F (260 C) maximum working temperature at 250 psig (1725 kPa/17 barg) NOTE: The working pressure or temperature rating is reduced accordingly if any attachment, valve, or fitting subjected to pressure or temperature during the drilling operation has a maximum working pressure or temperature rating less than that specified above. Equipment furnished with each Mueller C1-36-99002 Drilling Machine ❏ Wooden storage chest (not shown) ❏ Ratchet handle ❏ T-handle Socket wrench ❏ Three double open end wrenches ❏ Eight machine to adapter bolts and nuts ❏ Eight D-type machine to adapter washers ❏ Machine to adapter gasket ❏ Cutting grease ❏ Instruction manual (Form #8513) Total shipping weight Machine only weight Machine length C1-36-99002 424 lbs. (191 kg) 270 lbs. (120 kg) 51-1/2" Equipment to be selected ❏ Shell cutters, drills, pilot drills, cutter arbors, and cutter hubs–page 3.12 ❏ Machine adapters–page 3.13 ❏ Power operators–page 3.23 WARNING: Use on A-C pipe, which contains a known carcinogen, requires appropriate protective equipment and procedures be employed.

    ...