Page number 6

5.6 Rev. 9-09 Shaded area indicates change MUELLER® 230 SERIES MINI-BAND™ PIPE REPAIR CLAMPS AND MISCELLANEOUS EQUIPMENT 230 Series Mini-Band Pipe Repair Clamps - for 1/2" through 2" rigid copper, steel and PVC pipe. To specify the catalog number, use the charts to select the following information for the desired clamp: 1.Stylenumber230(change“0”to”1"forstainlesssteelboltoption) 2.Length:“03”for3"or”06"for6" 3. Size number (from chart below) Example: The catalog number for a 230 Style clamp, 6" long for 1" rigid copper pipe, with the stainless steel bolt option is 231-06-0113 Clamp style number 231 Clamp length 06 Clamp size number 0113 Typical MINI-BAND Clamp Style number 230 Nominal pipe size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Clamp size number 0063 0084 0088 0105 0113 0132 0138 0166 0163 0190 0213 0238 Pipe O.D. Standard steel, PVC 0.840 1.050 1.315 1.660 1.900 2.375 Type"K"copper 0.625 0.875 1.125 1.375 1.625 2.125 - Clamp size 1/2"-1" 1-1/4", 1-1/2" 2"-5" 6"-24" Bolt size 3/8" x 3" 3/8" x 3-1/2" 7/16" x 4" 7/16" x 5" Part numbers Corrosion resistive plating 584534 584535 584537 584538 Stainless steel 513363 513364 513366 513367 IMPORTANT: PIPE REPAIR CLAMPS have demonstrated their capability to seal against water pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of bolt tightening (when there is more than one bolt), as well as the type and extent of pipe damage, surface condition of the pipe, environmental conditions, and installation workmanship.

Page number 7

MUELLER® SINGLE SECTION FULL-SEAL® PIPE REPAIR CLAMPS Typical Single Section Full-Seal Clamp Shaded area indicates change Rev. 9-09 5.7 500 Series Single Section Full-Seal Pipe Repair Clamps - for 2" through 12" cast iron, ductile iron, steel pipe, A-C and PVC pipe To specify the catalog number, provide the following information : 1.Stylenumber—500 2.Length—Standardlengthavailable(inches):6,7-1/2(listas“7”),9,12,15,18,20,24,30 3.Sizenumber—fromchartonpage15.8 4.Catalognumberprefixorsufixforoptionalfeatures,ifdesired. The catalog number for 500 Single Section Full-Seal Repair Clamp, 12" long for 8" cast iron pipe is 500-12-899. Style number 500 Clamp style number 220 Clamp length 3 Clamp size number 190 Extra bolts and nuts for 500 series Mueller Single Section Full Seal Repair Clamps Starter nut Clamp size 2"-3-1/2" 4"-12" (standard bolt and nut) 4"-12" (starter bolt and nut) Bolt size 1/2"-4-1/2" 5/8"x6" 5/8x7" Bolt part number 521009 521008 524308 Nut part number 521010 195236 526655 NOTE: 4" and larger 500 Series Clamps are provided with one starter bolt/nut per side as standard. Stainless steel bolts Standard bolt & nut 510 Series nuts and bolts Foroptional304stainlesssteelbolts,washersandnuts,add“S-”prefixtoclampcatalognumber S-500-12-899. Deep socket wrenchs SpeciallydesignedforusewithMuellerFull-SealRepairClamps.Long ratchet handle has thumb- \tip reverse. Deep sockets (3-1/4") have double hex (12 pt.) and 1/2" square drive. Part number 515204 520344 515207 519575 Description 15-3/4" with reversible ratchet handle 7/8" socket for 2" through 3-1/2" clamps 1-1/16" socket for 4" and larger clamps 1/2"x3/4" adapter Bonding device Bonding device for cathodic protection Metallicconductorsaresetinthegaskettoprovidecontactbetweenthebandandthepipe surface and are available on all 500 series clamps. These conductors permit electrical current flowbyestablishingpositivecontactwithpipeandbandoneachsideofthepipecrackorbreak forcathodicprotection,addaprefixof“2”tocatalognumber. 2-500-12-899. Bonding device Add-on feature allows long lengthwise repairs The gasket is cemented into the band in a 1" offset position. This allows overlapping the gasket with the band of another offset clamp when repairing a longer than usual area of pipe. This featureisnotavailableonServi-Sealstyleclampsforlongerthanusualrepairs,addaprefixof“1”to catalog number 1-500-12-899. PIPE GASKET BAND Add-on feature Note: For O.D. not shown contact our Customer Service Center or your Mueller Sales Representative. IMPORTANT: PIPE REPAIR CLAMPS have demonstrated their capability to seal against water pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of bolt tightening (when there is more than one bolt), as the type and extent of pipe damage, surface condition of the pipe, enviromental conditions, and installation workmanship WARNING: Use on A-C pipe, which contains a known carcinogen, requires appropriate protective equipment and procedures be employed.

    ...