Page number 18

5.18 Rev. 9-09 Shaded area indicates change MUELLER® SINGLE SECTION SERVI-SEAL® ALL STAINLESS STEEL PIPE REPAIR CLAMPS 541-549 Series Single Section Servi-Seal All Stainless Steel Pipe Repair Clamps — for 2" through 12" cast iron, ductile iron, steel, A-C and PVC pipe. Standard Lengths: 7-1/2", 10", 12-1/2", 15", 20", 30" Nominal Pipe Size 2" 2-1/2" 3" 3" 3" 3-1/2" 4" 4" 4" 4" 6" 6" 6" 6" 6" 8" 8" 8" 8" 10" 10" 10" 10" 10" 12" 12" 12" 12" 12" Clamp size - number 235 270 297 345 373 395 445 474 495 522 595 656 684 705 740 795 854 899 927 970 1070 1104 1140 1175 1200 1262 1310 1340 1400 Clamp O.D. range* Inches Millimeters Min. Max Min. Max 2.35 2.63 59.7 66.8 2.70 3.00 68.6 76.2 2.97 3.25 75.5 82.5 3.45 3.72 87.9 94.4 3.73 4.00 94.8 101.6 3.95 4.45 4.74 4.95 5.22 5.95 6.56 6.84 7.05 7.40 7.95 8.54 8.99 9.27 9.70 10.70 11.04 11.40 11.75 12.00 12.62 13.10 13.40 14.00 4.25 4.87 5.14 5.35 5.62 6.35 6.96 7.24 7.45 7.80 8.35 8.94 9.39 9.67 10.10 11.10 11.44 11.80 12.15 12.40 13.02 13.50 13.80 14.40 100.3 113.1 120.4 125.8 132.6 151.1 166.6 173.8 179.1 188.0 201.9 216.9 228.4 235.5 246.4 271.8 280.5 289.6 298.5 304.8 320.5 332.7 340.4 355.7 107.9 123.6 130.5 135.8 142.7 161.3 176.8 183.8 189.2 198.1 212.1 227.1 238.5 245.6 256.5 281.9 290.6 299.7 308.6 315.0 330.7 342.9 350.5 365.7 Cast Iron 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250, A 50-250,A,B,C,D 50-250, A 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D Ductile Iron All All All All All All All All All All Cast Iron O.D. PVC Class 150, 200 Class 150, 200 Class 150, 200 Class 150, 200 Class 150, 200 Class 150, 200 Class 150, 200 Steel*** 2" 2-1/2" 3" O.D. 3" 3-1/2" (4" O.D.) STD 5" O.D. 6" O.D. STD STD 10" O.D. STD STD A-C Rough Barrel Class100**,150 Class100**,150 Class 150, 200 Class100**,150 Class 200 Class100**,150 Class 200 Class100** Class 150, 200 Class100** Class 150, 200 *Verify pipe O.D. before selecting clamp size. **CAUTION—O.D. of class 100 A-C pipe varies greatly. Measure pipe O.D. to assure proper clamp selection. ***Also fits PVC Plastic Pipe - ASTM D2241 SDR 17 and lower and ASTM D1785 schedule 80 and above. Note: For O.D. not shown contact our Customer Service Center or your Mueller Sales Representative. WARNING: Use on A-C pipe, which contains a known carcinogen, requires appropriate protective equipment and procedures be employed.

Page number 19

MUELLER® XTRA-RANGE® FULL-SEAL® ALL STAINLESS STEEL PIPE REPAIR CLAMPS Typical Xtra-Range Full-Seal Clamp Shaded area indicates change Rev. 9-09 5.19 550 Series Xtra-Range Full-Seal All Stainless Steel Pipe Repair Clamps - for 3" through 12" cast iron, ductile iron steel pipe, A-C and PVC pipe. To specify the catalog number, provide the following information : 1.Stylenumber—550 2.Length—Standard length available (inches): 7-1/2, 10, 12-1/2, 15, 20, 30 3.Sizenumber—from chart on page 15.20 4.Catalognumberprefixforoptionalfeatures,ifdesired. The catalog number for a 550 Xtra-Range Full-Seal Repair Clamp, 12" long for 6" cast iron pipe is 550-12-684. Clamp style number 550 Clamp length 12 Clamp size number 684 Style number 550 Extra Nuts and Washers for Mueller Xtra-Range Full Seal All Stainless Repair Clamps Clamp size 3"-12" (standard nut) Bolt size 5/8" Bolt part number 311581 Nut part number 311582 550 Series nut and washer Deep socket wrenchs SpeciallydesignedforusewithMuellerFull-SealRepairClamps.Long ratchet handle has thumb- tip reverse. Deep sockets (3-1/4") have double hex (12 pt.) and 1/2" square drive. Part number 515204 515207 Description 15-3/4" with reversible ratchet handle 1-1/16" socket for 2" and larger clamps Bonding device for cathodic protection Bonding device Metallicconductorsaresetinthegaskettoprovidecontactbetweenthebandandthepipesurfaceandareavailableonall500seriesclamps.Theseconductorspermitelectricalcurrentflow by establishing positive contact with pipe and band on each side of the pipe crack or break. To specify optional bonding deviceforcathodicprotection,addaprefixof“2”tocatalognumber. Example: 2-550-12-684. The gasket is cemented into the band in a 1" offset position. This allows overlapping the gasket with the band of another offset clamp when repairing a longer than usual area of pipe. This feature is not available on Servi-Seal style clamps. To specify optional add-on featureforlongerthanusualrepairs,addaprefixof“1”tocatalognumber. Example: 1-550-12-684. Add-on feature allows long lengthwise repairs Bonding device PIPE GASKET BAND Add-on feature Note: For O.D. not shown contact our Customer Service Center or your Mueller Sales Representative. IMPORTANT: PIPE REPAIR CLAMPS have demonstrated their capability to seal against water pressures com- monly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addi- tion, the pressure that a clamp can contain depends upon the torque applied to the bolts, the uniformity of bolt tightening (when there is more than one bolt), as well as the type and extent of pipe damage, surface condition of the pipe, environ- mental conditions, and installation workmanship. WARNING: Use on A-C pipe, which contains a known carcinogen, requires appropriate protective equipment and procedures be employed.

    ...