Page number 14

5.14 Rev. 2-11 Shaded area indicates change MUELLLER® XTRA-RANGE® SERVI-SEAL® PIPE REPAIR CLAMPS 511-519 Series Xtra-Range Full-Seal Pipe Repair Clamps — for 4" through 24" cast iron, ductile iron, steel, A-C and PVC pipe. Standard Lengths: 6", 7-1/2", 9", 10", 12", 15", 18", 20", 24", 30" Nominal Pipe Size 4" 6" 6" 8" 8" 10" 10" 12" 12" 14" 14" 16" 16" 16" 18" 18" 18" 20" 20" 20" 20" 20" 24" 24" 24" 24" 24" 24" 24" 24" 30" 36" Clamp size - number 470 662 675 862 888 1072 1105 1246 1310 1433 1510 1590 1655 1720 1760 1841 1922 1990 2070 2145 2220 2280 2344 2420 2490 2566 2672 2772 2863 2957 3122 3786 Clamp O.D. range* Inches Millimeters Min. Max Min. Max 4.50 5.50 119.4 139.7 6.62 7.42 168.1 188.5 6.75 7.55 171.5 191.7 8.62 9.42 218.9 293.3 8.88 9.68 225.6 245.8 10.72 11.72 272.3 297.7 11.05 12.05 280.7 306.0 12.46 13.26 316.5 336.8 13.10 14.30 332.8 363.2 14.33 15.13 364.0 384.3 15.10 15.90 383.6 403.8 15.90 16.70 403.9 424.1 16.55 17.35 420.4 440.6 17.20 18.00 436.9 457.2 17.60 18.40 447.1 467.3 18.41 19.21 467.7 487.9 19.22 20.02 488.2 508.5 19.90 20.70 505.5 525.7 20.70 21.50 525.8 546.1 21.45 22.25 544.9 565.1 22.20 22.80 23.44 24.20 24.90 25.66 26.72 27.72 28.63 29.57 31.22 37.86 23.00 23.60 24.24 25.00 25.70 26.46 27.52 28.52 29.83 30.77 32.42 39.16 563.9 579.2 595.4 614.7 632.5 651.8 678.7 704.1 727.3 751.1 793.0 961.6 584.2 599.4 615.6 635.0 652.7 672.0 699.0 724.4 757.6 781.5 823.5 994.7 Cast Iron 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D 50-250,A,B,C,D Ductile Iron All All All All All All All All All Cast Iron O.D. PVC Class 150, 200 Class 150, 200 Class 150, 200 Class 150, 200 Class 150, 200 Steel*** STD STD STD 12" O.D. STD 14" 16" 18" 20" 22" 24" 26" 28" 30" A-C Rough Barrel Class100**,150,200 Class100**,150,200 Class100**,150,200 Class100**,150,200 Class100**,150,200 Class100** 14" Class 150, 200 Class100** 16" Class 150, 200 Class100** 18" Class 150 20"Class100** 18" Class 150 20" Class 150 20" Class 200 20" Class 200 Class100** Class 150 Class 200 - *Verify pipe O.D. before selecting clamp size. **CAUTION—O.D. of class 100 A-C pipe varies greatly. Measure pipe O.D. to assure proper clamp selection. ***Also fits PVC Plastic Pipe - ASTM D2241 SDR 17 and lower and ASTM D1785 schedule 80 and above. Note: For O.D. not shown contact our Customer Service Center or your Mueller Sales Representative. WARNING: Use on A-C pipe, which contains a known carcinogen, requires appropriate protective equipment and procedures be employed.

Page number 15

MUELLER® SINGLE SECTION FULL-SEAL® ALL STAINLESS STEEL PIPE REPAIR CLAMPS Typical All Stainless Steel Series 540 Clamp Shaded area indicates change Rev. 9-09 5.15 540 Series Single Section Full-Seal All Stainless Steel Pipe Repair Clamps - for 2" through 12" cast iron, ductile iron, steel pipe, A-C and PVC pipe. To specify the catalog number, provide the following information : 1.Stylenumber—540 2.Length—Standard length available (inches): 7-1/2 (list as “7”), 12-1/2, 15, 20, 30 3.Sizenumber—from chart on page 15.16 4.Catalognumberprefixorsufixforoptionalfeatures,ifdesired. The catalog number for a 540 Single Section Full-Seal Repair Clamp, 12" long for 8" cast iron pipe is 540-12-899. Clamp style number 540 Clamp length 12 Clamp size number 899 Style number 540 Extra Nuts & Washers for Mueller Single Section Full Seal All Stainless Repair Clamps Clamp size 2"-3-1/2" 4"-12" (standard nut) Bolt size 5/8" Bolt part number 311581 Nut part number 311582 540 Seried nut and washer Deep socket wrenchs SpeciallydesignedforusewithMuellerFull-SealRepairClamps.Long ratchet handle has thumb- tip reverse. Deep sockets (3-1/4") have double hex (12 pt.) and 1/2" square drive. Part number 515204 515207 Description 15-3/4" with reversible ratchet handle 1-1/16" socket for 2" and larger clamps Bonding device for cathodic protection Bonding device Metallicconductorsaresetinthegaskettoprovidecontactbetweenthebandandthepipe surface and are available on all 500 series clamps. These conductors permit electrical current flowbyestablishingpositivecontactwithpipeandbandoneachsideofthepipecrackorbreak. To specify optional bonding deviceforcathodicprotection,addaprefixof“2”tocatalognumber. Example: 2-540-12-899. Add-on feature allows long lengthwise repairs Bonding device The gasket is cemented into the band in a 1" offset position. This allows overlapping the gasket with the band of another offset clamp when repairing a longer than usual area of pipe. This feature is not available on Servi-Seal style clamps. To specify optional add-on featureforlongerthanusualrepairs,addaprefixof“1”tocatalognumber. Example: 1-540-12-899. Note: For O.D. not shown contact our Customer Service Center or your Mueller Sales Representative. IMPORTANT: PIPE REPAIR CLAMPS have demonstrated their capability to seal against water pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain depends upon the torque applied to the bolts, the uniformity of bolt tightening (when there is more than one bolt), as well as the type and extent of pipe damage, surface condition of the pipe, environmental conditions, and installation workmanship. WARNING: Use on A-C pipe, which contains a known carcinogen, requires appropriate protective equipment and procedures be employed.

    ...