Page number 8

2.8 Rev. 7-19 Shaded area indicates changes 2"- 12" A-USP1 RESILIENT WEDGE GATE VALVES - GR x GR. ❏ Catalog number A-USP1-10 groove x groove ends ❏ Sizes – 2”++, 2 1/2”++, 3”, 4”, 6”, 8”, 10”, 12” § ❏ Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/130 Approved, and certified to ANSI/NSF 61 & 372 ❏ Groove ends comply with AWWA C606 ❏ Iron body with nominal 10 mils Pro-Guard ® Fusion Bonded Epoxy Coated interior and exterior surfaces ❏ Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard ❏ Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron ❏ Non-rising stem (NRS) ❏ Triple O-ring seal (2 above the thrust collar and 1 below) ❏ 2” square wrench nut - open left or open right ❏ 350 psig (2400 kPa/24 barg) maximum working pressure; 700 psig (4800 kPa/48 barg) static test pressure ❏ UL Listed, FM Approved – 350 psig (2400 kPa/24 barg) ❏ Designed for potable water applications A-USP1-10 shown M.J. accessories shipped unassembled Options See page 2.40 for more information on Resilient Wedge Gate Valve options ❏ Position indicators ❏ Stainless steel stem: Type 304, Type 316 ❏ Low zinc, silicon bronze ASTM B98-C66100/H02 stem ❏ Handwheel Resilient wedge gate valve parts Catalog Part Number Description Material Material Standard G-16 Bonnet Bolts & Nuts 316 Stainless Steel ASTM F593 (bolt) ASTM F594 (nut) G-41 Stuffing Box Bolts & Nuts 316 Stainless Steel AASSTTMM FF559934 ((bnoultt)) G-49 G-49 Stem O-rings (3) Nitrile ASTM D2000 G-200 Wrench Nut Cap Screw 316 Stainless Steel ASTM F593 G-201 Stuffing Box O-ring Nitrile ASTM D2000 G-202 Wrench Nut Ductile Iron ASTM A536 ▼ G-203 Stem Bronze ASTM B138 G-204 Hand Wheel (not shown) Cast Iron + ASTM A126 CL.B G-205 Stem Nut Bronze ASTM B584 G-206 Guide Cap Bearings Acetal - G-207 Stuffing Box with dirt seal Ductile Iron Nitrile ASTM A536 ▼ ASTM D2000 G-208 G-209 G-210 Anti-friction Washers (2) Wedge, Rubber Encapsulation Bonnet Acetal Ductile Iron* SBR Ductile Iron - ASTM A536 ▼ ASTM D2000 ASTM A536 ▼ G-211 Bonnet O-ring +++ Nitrile ASTM D2000 G-212 Body Ductile Iron ASTM A536 ▼ *Fully encapsulated in molded rubber with no iron exposed ▼ Material strength ASTM A536 65-45 minimum ** Per ANSI/AWWA C111 working pressure above 250psi requires the use of a special gasket rated for higher pressure. + Manufacturer’s option to change material to ductile iron ASTM A536 *** 3” valves meet or exceed all applicable requirements of ANSI/AWWA C509 Standard ++ 2” & 2 1/2” valves are model A2362 +++ 2” & 2 1/2” valves have a bonnet gasket SEE PAGE 2.52 FOR ORDERING INSTRUCTIONS ❏ EPDM Disc and o-rings G-202 G-200 G-207 G-41 G-201 G-208 G-203 G-210 G-16 G-211 G-205 G-212 G-209 G-206

Page number 9

2"- 12" A-USP1 RESILIENT WEDGE GATE VALVES - GR x GR. 2.9 Shaded area indicates change Rev. 7-19 § Dimensions Dimension 2” A 9.88 B 7.00 C*(overall width of bonnet flange) 7.00 ØD 1.56 ØE(bore) 0.34 F 0.63 G 2.38 Turns to open 8 Weight* 37 2 1/2” 12.38 7.50 8.63 1.97 0.34 0.63 2.88 11 44 3” 12.38 8.00 8.63 2.63 0.34 0.63 3.50 11 48 Nominal Size 4" 14.19 6" 18.00 9.00 10.50 10.79 13.50 3.75 5.80 0.34 0.34 0.63 0.63 4.50 6.63 14 20.5 64 114 8" 21.50 11.50 16.36 7.67 0.47 0.75 8.63 26.5 163 10" 25.50 13.00 20.00 9.80 0.47 0.75 10.75 33 247 12" 28.62 14.00 21.00 11.80 0.47 0.75 12.75 38.5 315 * All dimensions are in inches. All weights include accessories are in pounds and are approximate.

    ...