Page number 36

2.36 Rev. 11-18 Shaded area indicates changes 3”- 12” A-USP2 RESILIENT WEDGE GATE VALVES CLASS 250 - FL. x FL. ❏ Catalog number A-USP2-12 Class 250 flanged ends ❏ Sizes – 3”, 4”, 6”, 8”, 10”, 12” ❏ Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372† ❏ Flanged end drilling complies with ASME/ANSI B16.1 class 250 ❏ Iron body with nominal 10 mils Pro-Guard ® Fusion Bonded Epoxy Coated interior and exterior surfaces ❏ Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard ❏ Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron ❏ Non-rising stem (NRS) ❏ Triple O-ring seal (2 above the thrust collar and 1 below) ❏ 2” square wrench nut – open left or open right ❏ 350 psig (2400 kPa/34 barg) maximum working pressure; 700 psig (4800 kPa/48 barg) static test pressure ❏ UL Listed, FM Approved: 350 psig (2400 kPa/24 barg) ❏ Designed for potable water applications † Approved for backflow prevention devices by USC (for 4” - 10” sizes) A-USP2-12 shown Options See page 10.54 for more information on Resilient Wedge Gate Valve options ❏ Position indicators ❏ Low zinc, silicon bronze ASTM B98-C66100/H02 stem ❏ Stainless steel stem: Type 304, Type 316 ❏ Handwheel ❏ P/N 25 Drilling ❏ EPDM Disc and O-ring Resilient wedge gate valve parts Catalog Part Number Description G-16 Bonnet Bolts & Nuts Material 316 Stainless Steel G-41 G-49 G-200 G-201 G-202 G-203 G-204 G-205 G-206 G-207 G-208 G-209 G-210** G-211** G-212** Stuffing Box Bolts & Nuts Stem O-rings (3) Wrench Nut Cap Screw Stuffing Box O-ring Wrench Nut Stem Hand Wheel Stem Nut Guide Cap Bearings Stuffing Box with dirt seal Anti-friction Washers (2) Wedge, Rubber Encapsulation Bonnet Bonnet O-ring ++ Body 316 Stainless Steel Nitrile 316 Stainless Steel Nitrile Ductile Iron Bronze Cast Iron + Bronze Acetal Ductile Iron Nitrile Acetal Ductile Iron* SBR Ductile Iron Nitrile Ductile Iron *Fully encapsulated in molded rubber with no iron exposed; ▼ Material strength ASTM A536 65-45 minimum + Manufacturer’s option to change material to ductile iron ASTM A536 ++ 2-3” valves use a bonnet gasket Material Standard ASTM F593 (bolt) ASTM F594 (nut) ASTM F593 (bolt) ASTM F594 (nut) ASTM D2000 ASTM F593 ASTM D2000 ASTM A536 ▼ ASTM B138 ASTM A126 CL.B ASTM B584 - ASTM A536 ▼ ASTM D2000 - ASTM A536 ▼ ASTM D2000 ASTM A536 ▼ ASTM D2000 ASTM A536 ▼ SEE PAGE 10.52 FOR ORDERING INSTRUCTIONS

Page number 37

3”- 12” A-USP2 RESILIENT WEDGE GATE VALVES CLASS 250 - FL. x FL. 2.37 Shaded area indicates change Rev. 11-18 Dimensions Dimension A R FF Q (bore) UU (bolt circle diameter) B (number and size of holes) Turns to open Weight* 3” 12.38 9.00 11.10 3.30 6.63 8--.88 11 85 4" 14.19 10.00 12.00 4.30 7.87 8--.88 14 121 6" 18.00 12.50 15.86 6.30 10.63 12--.88 20.5 202 8" 21.50 15.00 16.50 8.30 12.99 12--1.125 26.5 328 10" 25.50 17.50 18.00 10.30 15.24 16--1.25 33 519 12" 28.62 20.50 19.75 12.30 17.76 16--1.25 38.5 674 *All dimensions are in inches. All weights are in pounds and are approximate.

    ...