Page number 18

2.18 Rev. 7-17 Shaded area indicates changes 4"- 12" A-USP1 RESILIENT WEDGE GATE VALVES - SL. x SL. (FOR FIELD LOK ™ †† GASKETS) ❏ Catalog number– A-USP1-61 Slip On ends (less Field Lok gaskets) ❏ Sizes – 4", 6", 8", 12" ❏ Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372 ❏ Slip-on ends with Field Lok gaskets are to be used on ductile iron pipe ❏ Iron body with nominal 10 mils Pro-Gard ® Fusion Bonded Epoxy Coated interior and exterior surfaces ❏ Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard ❏ Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron ❏ Non-rising stem (NRS) ❏ Triple O-ring seal (2 above the thrust collar and 1 below) ❏ 2” square wrench nut – open left or open right ❏ 350 psig (2400 kPa/24 barg) maximum working pressure; 700 psig (4800 kPa/48 barg) static test pressure ❏ UL Listed, FM Approved: 350 psig (2400 kPa/24 barg) ❏ Designed for potable water applications †Design and dimensions of the joint are manufactured under license of U.S. Pipe and Foundry Company. ††Field Lok is a trademark of U.S. Pipe and Foundry Company, used with permission. A-USP1-61 shown Slip-on ends on this valve are intended for use with Field Lok †† restrained gaskets. Options See page 2.40 for more information on Resilient Wedge Gate Valve options ❏ Position indicators ❏ Stainless steel stem: Type 304, Type 316 ❏ Low zinc, silicon bronze ASTM B98-C66100/H02 stem ❏ Handwheel ❏ EPDM Disc and o-rings Resilient wedge gate valve parts Catalog Part Number Description Material Material Standard G-16 Bonnet Bolts & Nuts 316 Stainless Steel ASTM F593 (bolt) ASTM F594 (nut) G-41 Stuffing Box Bolts & Nuts 316 Stainless Steel AASSTTMM FF559934 ((bnoultt)) G-49 G-49 Stem O-rings (3) Nitrile ASTM D2000 G-200 Wrench Nut Cap Screw 316 Stainless Steel ASTM F593 G-201 Stuffing Box O-ring Nitrile ASTM D2000 G-202 Wrench Nut Ductile Iron ASTM A536 ▼ G-203 Stem Bronze ASTM B138 G-204 Hand Wheel (not shown) Cast Iron + ASTM A126 CL.B G-205 Stem Nut Bronze ASTM B584 G-206 Guide Cap Bearings Acetal - G-207 Stuffing Box with dirt seal Ductile Iron Nitrile ASTM A536 ▼ ASTM D2000 G-208 Anti-friction Washers (2) Acetal - G-209 Wedge, Rubber Encapsulation Ductile Iron* SBR ASTM A536 ▼ ASTM D2000 G-210 Bonnet Ductile Iron ASTM A536 ▼ G-211 Bonnet O-ring Nitrile ASTM D2000 G-212 Body Ductile Iron ASTM A536 ▼ *Fully encapsulated in molded rubber with no iron exposed ▼ Material strength ASTM A536 65-45 minimum + Manufacturer’s option to change material to ductile iron ASTM A536 SEE PAGE 2.52 FOR ORDERING INSTRUCTIONS G-202 G-200 G-207 G-41 G-201 G-208 G-203 G-210 G-16 G-211 G-205 G-212 G-209 G-206

Page number 19

4"- 12" A-USP1 RESILIENT WEDGE GATE VALVES - SL. x SL. (FOR FIELD LOK ™ ** GASKETS) 2.19 Shaded area indicates change Rev. 7-16 A Q Dimensions L W DD FF Dimension A Q (bore) W (distance between strapping lug holes across face of valve ends) FF L DD Turns to open Weight* 4" 14.19 4.30 8.62 12.81 4.12 4.57 14 85 *All dimensions are in inches. All weights are in pounds and are approximate. **Field Lok is a trademark of U.S. Pipe and Foundry Company, used with permission. 6" 18.00 6.30 10.62 14.96 4.38 6.2 20.5 144 Nominal Size 8" 21.50 8.30 13.12 17.94 5.62 6.7 26.5 233 10” 25.50 10.30 16.38 18.50 5.62 7.26 33 369 12" 28.62 12.30 18.12 18.70 5.62 7.46 38.5 523

    ...