Page number 16

SECTION 3 – Service Fittings Copper Gasket - E-1561 Part Number E-1561 Description Copper Gasket used inside copper service couplings Pipe Plug - E-150 Part Number E-150 Description Brass plug - Square head with AWWA taper ("CC") thread Sizes 3/4" 1" 1-1/2" 2" Sizes 3/4" 1" Equipment and Tools Brass Hammer Solid brass head with 10" wooden handle. Weight 2-3/4 lb. CATALOG NUMBER: J-18025 Brass cap Fits on copper flare spud to cap off line. CATALOG NUMBER: J-15540N 3/4" 1" Used to ream the inside of type "K" copper tubing to remove burrs prior to flaring. CATALOG NUMBER: J-18010 1/2" 3/4" 1" Solid copper disc Used with regular copper flare nut to shut off line. CATALOG NUMBER: J-15535 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Drilled flaring tool Used to make 45° flare on type "K" copper tubing without shutting off water-drilled to exhaust water at right angle to tubing. CATALOG NUMBER: J-18005 Reamer 3/4" 1" Note: When using any striking tool, safety eye protection must be worn. Inspect hammer and tools for any damage after each use and repair or replace if mushrooming or chipping is evident. JONES Service Fittings are manufactured and tested in accordance with ANSI/AWWA C-800. Components in contact with potable water will also comply with latest requirements of the Federal Safe Drinking Water Act. 16 Rev 10-18