Page number 30

9.30 Rev. 9-17 Shaded area indicates changes D-5 ™ /DH-5 ™ Machine Control Valve H-17160 Bushing Installation Test Cap Completion Plug Wrench Drilling MAOP* Power Operator Machine Adapter Boring Bar Extension Cutter Arbor Shell Cutter Pilot Drill Cutting Grease Honing Stone Stopping MAOP* Stopping Machine Machine Adapter Machine Adapter Bushing Stopper Holder Solid Rubber Stopper Top Bypass Rubber Stopper Bottom Bypass Stopper Full Bypass Rubber Stopper Bottom Out Stopper Rubber Stopper Lubricant Inserting MAOP* Inserting Machine Machine Adapter Boring Bar Adapter Extension Inserting Tool Extracting MAOP* Extracting Machine Machine Adapter Extracting Tool Adapter Extracting Tool *Maximum Allowable Operating Pressure †Modified Tool Holder Replacement Rubber Replacement Rubber Replacement Rubber Replacement Rubber Replacement Seal MUELLER ® NO-BLO ® LINE STOPPER FITTING H-17160 1-1/2" + 2" H-10918 2-1/2" - 036812 581264 250 psig H-604 682503 64297 88470 36337 36336 88366 682560 250 psig D-5/DH-5 682503 507782 580932† 88478 36290 88471 36298 81495 36298 680513 509446 681989 529002 580657 250 psig D-5/DH-5 682503 64297 36190 250 psig D-5/DH-5 682503 36198 83213

Page number 31

MUELLER ® NO-BLO ® BOTTOM OUT LINE STOPPER FITTING WELDING TYPE - 1440 PSIG o Catalog number – H-17161 o Sizes – 1-1/2", 2", 2-1/2" o For use on steel pipe only o Bottom out feature o Fitting top and bottom halves are forged steel (ASTM A105) o Completion Plug makes primary seal o Steel Completion Cap makes secondary seal o 1440 psig* (9930kPa) 9.31 Shaded area indicates change Rev. 3-08 H-17161 How to select equipment 1) Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart. 2) Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve. 3) Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation. Pipe Dimensions Size of Line Stopper Fitting 1-1/2" 2" 2-1/2" Outside Diameter of Shell Cutter Required (Inches) 2.250 2.250 2.625 Outside Diameter of Pipe (Inches) 1.900 2.375 2.875 Replacement Parts Replacement Parts Completion Cap Completion Plug Size of Fitting 1-1/2" 2" 2-1/2" 52365 52365 52375 36303 36303 36402 * This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

    ...