Page number 12

6.12 Rev. 12-06 Shaded area indicates changes MUELLER ® AUTOPERF ® TEE OPERATING WRENCHES AND CRIMPING TOOLS Mueller NO-BLO ® Autoperf Operating Wrench H-18090 H-18090 and H-18091 Mueller NO-BLO Autoperf Operating Wrenches are used to perforate holes in mains under pressure. The entire operation is done using Mueller NO- BLO Methods with no blowing of gas. 1200 psig maximum working pressure. H-18090 : Mueller NO- BLO Operating Wrench with ratchet handle. H-18091 : Same as H-18090 but less ratchet handle (not shown). Wrench 3/4" x 3/8" H-18092 Crimping Tool H-18092 and H-18093 Crimping Tools are used to form the top of a steel Autoperf tee body to retain perforator and prevent unintentional removal. 1200 psig maximum working pressure. H-18092 : Crimping Tool with ratchet handle. H-18093 : Same as H-18092 but less ratchet handle (not shown). Crimping Tool Sizes 1/2" 3/4" Operating Wrench H-18094 H-18094 and H-18095 Operating Wrenches are used to perforate holes in mains that are NOT under pressure. H-18094 : Operating Wrench with ratchet handle. H-18095 : Same as H-18094 but less ratchet handle (not shown). 1/2" x 1/4" Wrench Sizes* 1/2" x 5/16" 3/4" x 3/8" Operating Wrench H-18096 Operating Wrench used to perforate holes in mains that are NOT under pressure. “T” handle slides to either end for use as a lever. Socket guide keeps the hex wrench centered in the tee. H-18096 Wrench Sizes* 1/2" x 5/16" 3/4" x 3/8" Compact Crimping Tool H-18097 H-18097 Compact Crimping Tool for 3/4" Autoperf Tees is designed to be used before the main is perforated, therefore, this tool is not pressure rated allowing it to be less bulky and lighter weight than the H-18092 tool. Crimping Tool Size 3/4" *First size is size of tee, second is size of hex wrench that fits perforator.