Page number 4

2.4 Rev. 8-17 Shaded area indicates changes MUELLER ® EH-5 ™ DRILLING & STOPPING MACHINE Mueller ® EH-5 ™ Machine — for drilling and stopping operations under pressure o Catalog number – 39341 o Hand, air or hydraulic power operation o Used to install up to 2" Tees, Save-A-Valve® Drilling Nipples, and Line Stopper Fittings o 12-1/8" (308 mm) boring bar travel o Balanced pressure feature. Refer to machine operating manual for important precautions. o 1200 psig (8273 kPa) maximum working pressure at 100 F (38 C) NOTE: The working pressure or temperature rating is reduced accordingly if any attachment, valve, or fitting subjected to pressure or temperature during the drilling operation has a maximum working pressure or temperature rating less than that specified above. Equipment furnished with each EH-5 Machine: o Wooden Storage Chest (311658) o Reversible Ratchet Handle (580897) o Body Gasket (47756) o Adjustable Wrench (91664) o Two double open end Wrenches ( 9/16"x11/16" 59787 and 3/4"x13/16" 96536) o Cutting Grease (88366) o Operating Instruction Manual (Form 9675) Weight Total shipping weight Machine only weight 55 lbs. 34 lbs. Mueller ® NO-BLO ® Operations performed by the MUELLER ® EH-5 Machine Item Size* Mueller NO-BLO Operation Mueller NO-BLO Service Tees 3/4" 1" 1-1/4" 1-1/2" 2" Drill main, insert or extract completion plug, make stop-off Mueller NO-BLO Service Stop Tees 1/2" 3/4" 1" 1-1/4" 2" Drill main, insert or extract stem and bushing, recondition body seat Mueller NO-BLO Curb Stop Tees - 1" 1-1/4" 2" - Drill main, insert or extract stem, recondition body seat Mueller NO-BLO Steel Valves - 1" - - - Insert or extract stem, recondition body seat Mueller NO-BLO Service Line Stopper Fittings 3/4" 1" 1-1/4" - - Drill main, insert or extract completion plug, make stop-off Mueller Low Pressure Line Stopper Fittings 3/4" 1" 1-1/4" 2" - Drill main, insert or extract completion plug, make stop-off Mueller Save-A-Valve Drilling Nipples 3/4" 1" 1-1/4" 1-1/2" 2" Drill main, insert or extract completion plug *The size of Mueller NO-BLO Tees, as used in this table, refers to the size of the inlet. The size of Mueller Steel Valves, Service Line Stopper Fittings, Low Pressure Line Stopper Fittings and Save-A-Valve Drilling Nipples refers to the nominal size.

Page number 5

MUELLER ® EH-5 ™ MACHINE REPAIR PARTS 2.5 Shaded area indicates change Rev. 8-17 Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Part Number 580897 80085 500635 51484 83431 500803 37863 51426 37883 502029 502028 537126 312443 51427 503162 503163 51428 503160 305006 59810 500851 502025 502026 502027 503158 48130 580610 79345 96993 79350 40870 47756 526550 91664 96536 59787 88366 681570 526552 526551 Part Name Ratchet Handle Complete Crank Handle Handle Pin Handle Knob Complete Operating Pin Detent Knob Ratchet Dog Spring Lock Nut Operating Screw Bushing (2) Stem Fastener (2) Freeze Plug Ratcht Wheel Wheel Bushing Retaining Ring Boring Bar (Top) Hex Socket Set Screw (2) Spring (2) Detent (2) Arm Spring Roll Pin Roll Pin Friction Collar Pin Friction Collar O-ring Set Screw O-ring (2) Drain Valve Fiber Gasket Boring Bar (Bottom) Adjustable Wrench Wrench 3/4" X 13/16" Wrench 9/16"x 11/16" Cutting Grease Feed Tube And Yoke Body Cylinder Wooden Storage Chest 311658 (not illustrated). NOTE: These illustrations are for parts identification only. DO NOT use these illustrations for assembly or disassembly of machine. Mueller Co. offers a machine repair service. Contact Mueller Customer Service Center for details. NOTE: These illustrations are for parts identification only. DO NOT use these illustrations for assembly or disassembly of machine.

    ...