Page number 2

2.2 Rev. 8-17 Shaded area indicates changes MUELLER ® E-5 ™ DRILLING & STOPPING MACHINE Mueller ® E-5 ™ Machine — for drilling and stopping operations under pressure o Catalog number – 39330 o Hand, air or hydraulic power operation o Used to install up to 2" tees, Save-A-Valve ® Drilling Nipples and Line Stopper Fittings o Has boring bar locking mechanism for safe, positive operation o Test plug feature allows for stack pressurization o 12-1/8" (308 mm) boring bar travel o 500 psig (3447 kPa) maximum working pressure at 100 F (38 C) NOTE : The working pressure or temperature rating is reduced accordingly if any attachment, valve, or fitting subjected to pressure or temperature during the drilling operation has a maximum working pressure or temperature rating less than that specified above. Equipment furnished with each E-5 Machine: o Metal Storage Chest (580971) o Reversible Ratchet Handle (580897) o Body Gasket (47756) o Adjustable Wrench (91664) o Two double open end Wrenches ( 9/16"x11/16" 59787 and 3/4"x13/16" 96536) o Cutting Grease (88366) o Operating Instruction Manual (Form 9335) Weight Total shipping weight Machine only weight 49 lbs. 32 lbs. MUELLER ® NO-BLO ® Operations performed by the MUELLER ® E-5 ™ Machine Item Size* Mueller NO-BLO Operation Mueller NO-BLO Service Tees 3/4" 1" 1-1/4" 1-1/2" 2" Drill main, insert or extract completion plug, make stop-off Mueller NO-BLO Service Stop Tees 1/2" 3/4" 1" 1-1/4" 2" Drill main, insert or extract stem and bushing, recondition body seat Mueller NO-BLO Curb Stop Tees - 1" 1-1/4" 2" - Drill main, insert or extract stem, recondition body seat Mueller NO-BLO Steel Valves - 1" - - - Insert or extract stem, recondition body seat Mueller NO-BLO Service Line Stopper Fittings 3/4" 1" 1-1/4" - - Drill main, insert or extract completion plug, make stop-off Mueller Low Pressure Line Stopper Fittings 3/4" 1" 1-1/4" 2" - Drill main, insert or extract completion plug, make stop-off Mueller Save-A-Valve Drilling Nipples 3/4" 1" 1-1/4" 1-1/2" 2" Drill main, insert or extract completion plug *The size of Mueller NO-BLO Tees, as used in this table, refers to the size of the inlet. The size of Mueller Steel Valves, Service Line Stopper Fittings, Low Pressure Line Stopper Fittings and Save-A-Valve Drilling Nipples refers to the nominal size.

Page number 3

MUELLER ® E-5 ™ MACHINE REPAIR PARTS 37 2.3 Shaded area indicates change Rev. 8-17 Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Part No. 80085 500635 51484 83431 37883 51426 51427 502027 502025 502026 502029 502028 48130 51432 46726 503159 47756 580999 88366 91664 59787 96536 580610 580895 537126 312443 500851 59810 305006 51428 503163 503162 500803 37863 312598 41435 580897 Part Name Crank Handle Handle Pin Handle Knob Spring Ratchet Dog Plug Pivot Arm Pin Pivot Arm Pivot Arm Spring Lock Nut Operating Screw Friction Collar Pin Packing Gland O-ring Body Body Gasket Boring Bar Complete Cutting Grease Adjustable Wrench Wrench 9/16"x 11/16" Wrench 3/4" X 13/16" Friction Collar Feed Tube And Yoke Bushing (2) Retaining Screw (2) Detent Pin (2) Spring (2) Screw Retaining Ring Wheel Bushing Ratchet Wheel Operating Pin Detent Knob Detent Screw Body Plug Ratch Handle Complete Metal Storage Chest 580971 (not illustrated) NOTE: These illustrations are for parts identification only. DO NOT use these illustrations for assembly or disassembly of machine. Contact Mueller Customer Service Center for assistance.

    ...