Page number 18

2.18 Rev. 8-17 Shaded area indicates changes SMALL DRILLING & STOPPING MACHINE CONTROL VALVES Bronze Gate Valve – 125 psig (862kPa) maximum working pressure at 100 F (38 C) H-10914 – Bronze gate valve 1-1/4" 2.75” 5.22” Sizes 1-1/2" 2" 2-1/2" Lay Length (face to face) 2.812” 3.375” 4.812” Center Line of Valve to End of Handle 6.25” 7.06” 8.41” 3" 4.625” 10” H-10914 Bronze Gate Valve Control Chamber - 125 psig (862 kPa) maximum working pressure at 100 F (38 C) H-17025 – Control Chamber connects directly to E Series machines and is used on steel tees. It has a bypass/equalizing valve feature, and comes complete with 1”, 1-1/4” and 1-1/2” adapter bushings. 1/2" 503080 Control chamber adapter bushings 3/4” 1” 1-1/4” 502232 78829 78830 1-1/2” 78831 Spanner Wrench 44628 – Spanner Wrench for use with H-17025 Control Chamber adapter bushings. H-17025 Control Chamber 44628 Spanner Wrench Slide Gate Valve - 275 psig (1896 kPa) maximum working pressure at 100 F (38 C) H-10917 – Slide gate valve with aluminum body, O-ring sealed steel slide gate and by-pass/ equalizing valve is a low profile, quick acting control valve. 2" 2" 313111 Sizes 2-1/2” 3” O-Ring Kits 2-1/2” 3” 313112 313113 4” 4” 313114 Steel Ball Valve - 2000 psig (13790 kPa) maximum working pressure at 100 F (38 C) H-10918 – High pressure ball valve for use during No-Blo ® tapping and stopping oper- ations. This quarter-turn forged steel valve is available in 1-1/4", 1-1/2", 2", 2-1/2" and 3" sizes. Sizes 1-1/4" 1-1/2" 2" 2-1/2" 3" Lay Length (face to face) 4.37” 4.72” 5.53” 7.27” 8.02” Center Line of Valve to End of Handle 5.91” 6.85” 6.85” 8.84” 13.74” Repair/gasket replacement kits 1-1/4" 1-1/2" 2" 2-1/2" 3" 682626 682627 682628 682629 682630 1-1/4" 312897 Replacement Ball 1-1/2" 2" 2-1/2" 312896 312895 312894 3" 312893 H-10918 Steel Ball Valve

Page number 19

H-604 AIR POWER OPERATOR 2.19 Shaded area indicates change Rev. 7-21 H-604 Air Power Operator o Catalog number H-604 o Mounts directly to E-5 ™ , EH-5 ™ , D-5 ™ , DH-5 ™ A-3 & B-101 machines without special adapters o Reversible air motor o 35 RPM maximum free speed o Air supply: 55 cubic feet of free air per minute at 90 psig o Total shipping weight 49 lbs. (22 kg) o Machine only weight 40 lbs. (18 kg) o Shipped in a durable, lightweight polymer case o Motor includes in-line oiler (P/N 311817) H-604 Air Power Operator IMPORTANT: MAINTAIN PRESSURE OF 90 PSIG AT THE OPERATOR —THE USE OF A GAGE AT THE THROTTLE TO DETERMINE THE ACTUAL PRESSURE OF AIR AT THE POWER OPERATOR IS RECOMMENDED. H-704 Hydraulic Power Operator o Catalog number H-704 o Use with E-5 ™ , EH-5 ™ , D-5 ™ , DH-5 ™ , A-3 & B-101 drilling machines o Reversible operation o Removable handle for efficient storage o Preset safety relief valve prevents over-torque conditions o Flow Range — 7 to 9 gpm (27-34 lpm) o Motor Speed — 33 rpm at 8 gpm (30 lpm) o Maximum Pressure (continuous) — 2000 psig (138 bar) o Maximum Pressure (intermittent) — 2750 psig (190 bar) o Total Shipping Weight — 73 lbs (33 kg) o Machine Only Weight — 52 lbs (24 kg) H-704 Hydraulic Power Operator

    ...