Page number 28

16.28 Rev. 11-18 Shaded area indicates changes MUELLER ® 200 SERIES PIPE-SAVER ® PIPE REPAIR CLAMPS The 200 Series Pipe-Saver Clamp comes in 3", 6", 9", 12", and 18" lengths, in single section to fit 1/2" - 8" standard steel pipe, and in two sections to fit 10" - 24" standard steel pipe. Cemented-in gaskets are available with a choice of smooth or gridded surfaces, and regular or full coverage. High carbon steel bolts with corrosion-resistant plating are standard; stainless steel bolts optional. Mueller 200 Series Pipe-Saver clamp features: ❏ Maximum Gas Working Pressure - for properly in- stalled clamps with nuts tightened to specified torque: 1/2"-4" 175; 6"-8" 100 psig; 10"-12" 75 psig; 14"-16" 50 psig; 18"-24" 30 psig. (Form 12115) ❏ Repair Holes and Splits ❏ Choice of Smooth or Gridded - regular or full coverage gaskets. ❏ Heavy Bolt Shoulders - prevent turning in lug. ❏ Steel Bolt - has rolled, spin-fit threads to speed installation. ❏ Heavy Hex Nut - provides more thread contact for greater strength. ❏ Type 304L stainless steel band ❏ Ductile Iron Lugs - are shaped to provide uniform clamping pressure on pipe. IMPORTANT: MUELLER PIPE REPAIR CLAMPS have demonstrated their capability to seal against gas pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of the bolt tightening (where there is more than one bolt) as well as the type of extent of pipe damage, surface condition of the pipe, environmental conditions and installation workmanship. Metallic components of repair clamps, including stainless steel, corrode at widely variable rates depending upon many factors, such as installation outdoors or underground, composition of sur- rounding atmosphere/soil, presence of stray currents, moisture or chemicals, etc. Consequently, repair clamps must be assumed to have a finite service life. Consult with a corrosion professional to determine the life expectancy of this repair clamp taking into consideration all appropriate factors in the application. The piping system designer should determine the suitability of this type product on your particular system. Unforeseen failure of this product could result if these precautions are not taken. Mueller Co. can provide additional material specification information on request by contacting Customer Service: 800-798-3131.

Page number 29

MUELLER ® 200 SERIES PIPE-SAVER ® PIPE REPAIR CLAMPS 16.29 Shaded area indicates change Rev. 10-18 Typical 200 Series Pipe-Saver Clamps Mueller 200 Series Pipe-Saver Pipe Repair Clamps - for 1/2" through 24" standard steel pipe To specify the catalog number , use the charts to select the following in- formation for the desired clamp: 1. Style number 2. Length 3. Size number Example : The catalog number for a 220 Style Clamp, 3" long for 1-1/2" steel pipe is 220-03-0190. 220 Two Section Clamp with Regular Gasket Coverage 218 Single Section Clamp with Regular Gasket Coverage 211 Single Section Clamp with Full Gasket Coverage 212 Single Section Clamp with Full Gasket Coverage Clamp style number Style number Type of Gasket 210 Smooth 211 Smooth 212 Gridded 213 Gridded 218 Smooth 219 Smooth 220 Gridded 221 Gridded Gasket Coverage Full Full Full Full Regular Regular Regular Regular Bolts Corrosion Resistive Plating Stainless Steel X X X X X X X X *Clamps available to fit specific size standard steel pipe within this nominal size range. Sizes available* 1/2"-24" 1/2"-24" 1/2"-24" 1/2"-24" 1-1/2"-24" 1-1/2"-24" 3/4"-24" 1-1/2"-24" Clamp Length and Clamp Size Number Std. Steel Pipe Size†† 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" Clamp Size Number 0084 0105 0131 0166 0190 0237 0287 0350 0400 0450 0556 0662 0862 1075 1275 1400 1600 1800 2000 2400 Std. Steel Pipe O.D. 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.00 4.500 5.563 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 †† Nominal Sizes . Number of Clamp Sections 1 2 Single Section Clamps 1/2"-8" O.D. Clamp Lengths Available 3" 6" 9" 12" 18" Number of Bolts 1 2 3 4 6 Two Section Clamps 10"-24" O.D. Clamp Lengths Available 3" 6" 9" 12" 18" Number of Bolts 2 4 6 8 12 *2", 3" O.D. Clamps limited to 18" long IMPORTANT: MUELLER PIPE REPAIR CLAMPS have demonstrated their capability to seal against gas pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of the bolt tightening (where there is more than one bolt) as well as the type of extent of pipe damage, surface condition of the pipe, environmental conditions and installation workmanship. Metallic components of repair clamps, including stainless steel, corrode at widely variable rates depending upon many factors, such as installation outdoors or underground, composition of sur- rounding atmosphere/soil, presence of stray currents, moisture or chemicals, etc. Consequently, repair clamps must be assumed to have a finite service life. Consult with a corrosion professional to determine the life expectancy of this repair clamp taking into consideration all appropriate factors in the application. The piping system designer should determine the suitability of this type product on your particular system. Unforeseen failure of this product could result if these precautions are not taken. Mueller Co. can provide additional material specification information on request by contacting Customer Service: 800-798-3131.

    ...