11.102 Shaded area indicates change Rev. 11-18 MUELLER ® FLANGED TEE - 720 PSIG o Catalog number – H-17506 Completion Cap o Sizes – 3", 4", 6", 8" Completion Cap o For use on steel pipe only---bottom of tee is contoured to Bolts and Nuts fit pipe one size larger than nominal size of tee o Also available with flat bottom (no contour/no bevel) Completion Plug O-ring using H-17506-99000 o For inlet beveled but not contoured, use H-17506-99001 o O-ring sealed steel (ASTM A216 GR. WCB) Completion Plug with equalizing valve o Flange and Completion Cap are Forged Steel (ASTM A105 ) o Tee Body is forged steel (ASTM A234 Grade WPB) o Class 300 flange complies with dimensional requirements of ANSI B16.5 o 720 psig** (4136 kPa) maximum working pressure Test Plug Gasket Equalizing Valve Completion Plug H-17506 Pipe Dimension Size* of Line Stopper Fitting 3" 4" 6" 8" Size of Pipe Tee Is Contoured For 4" 6" 8" 10" Outside Diameter of Shell Cutter Required 2-1/2" 3-1/2" 5-1/2" 7-1/2" Outside Diameter of Pipe 3.500" 4.500" 6.625" 8.625" Pipe Dimensions Maximum Wall Thickness Minimum Wall Thickness No limit No limit .432" (sch. 80) .406" (sch. 60) .188" .188" .250" .250" Maximum Inside Diameter 3.124" 4.124" 6.125" 8.125" Drilling/Stopping Machine combinations that can be used to install and stop-off H-17506 tees Drilling Machine C1-36 Unit No. 2 H-17506 3" and 4" Line Stopper Units Unit No. 3 Unit No. 3SW 6" and 8" 4", 6" and 8" Unit No. 3SW-500 4", 6" and 8" Replacement Parts Fitting Size* 3" 4" 6" 8" Completion Cap Test Plug 64203 64204 64205 64206 64134 64134 64134 64134 Completion Cap Bolts and Nuts (No. Re- quired) 43912 (8) 43911 (8) 500894 (12) 43908 (12) Completion Cap Gasket 43959 36377 62945 63057 Completion Plug Assembly 83489 83490 83491 83492 O-ring Seal 43922 43917 79895 79020 *Nominal **This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments.
Download PDF file