11.100 Shaded area indicates change Rev. 10-18 MUELLER ® FLANGED TEE - 275 PSIG o Catalog number – H-17505 Completion Cap o Sizes – 3", 4", 6", 8" Completion Cap Bolts and Nuts o For use on steel pipe only---bottom of tee is contoured to fit pipe one size larger than nominal size of tee Completion Plug O-ring o O-ring sealed cast iron (ASTM A126 CL. B) Completion Plug with equalizing valve o Completion Cap cast iron (ASTM A126 CL. B) o Flange is forged steel (ASTM A105) o Tee body is forged steel (ASTM A234 Grade WPB) o Also available with flat bottom (non-contoured and non- beveled) using H-17505-99000 o For inlet beveled but not contoured, use H-17505-99001 o Class 150 flange complies with dimensional requirements of ANSI B16.5 o 275 psig** (1896 kPa) maximum working pressure Test Plug Gasket Equalizing Valve Completion Plug Assembly H-17505 Pipe Dimension Size* of Flanged Fitting 3" 4" 6" 8" Size of Pipe Tee Is Contoured For 4" 6" 8" 10" Outside Diameter of Shell Cutter Required 2-1/2" 3-1/2" 5-1/2" 7-1/2" Outside Diameter of Pipe 3.500" 4.500" 6.625" 8.625" Pipe Dimensions Maximum Wall Minimum Wall Thickness Thickness No limit No limit .432" (sch. 80) .406" (sch. 60) .188" .188" .250" .250" Maximum Inside Diameter 3.124" 4.124" 6.125" 8.125" Drilling/Line Stopping Machine combinations that can be used to install and stop-off H-17505 Tees Line Stopper Units Drilling Machine Unit No. 2 Unit No. 3 Unit No. 3SW Unit No. 3SW-500 C1-36 3" and 4" H-17505 6" and 8" 4", 6" and 8" 4", 6" and 8" Replacement Parts Fitting Size* 3" 4" 6" 8" Completion Cap 36590 36592 36609 36625 Test Plug 64134 64134 64134 64134 Completion Cap Bolts and Nuts (No. Required) 503708 (6) 36731 (8) 36446 (8) 503709 (8) Completion Cap Gasket 43959 36377 62945 63094 Completion Plug Assembly 83484 83485 83487 83493 O-ring Seal 43922 43917 79895 79020 *Nominal **This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments.
Share
Print
Download PDF file
