DESKLIFT™ DL 10 IC The DESKLIFT™ DL10 IC (Integrated Controller) is a compact two-part lifting column with round profiles based on our DL10 column. The DL10 IC is a perfect choice for adjustable economy office desks using only two columns and requiring a stroke length of maximum 500 mm. The DL10 IC lifting column has the same outer profile dimension and mounting holes as the three-part DL11 IC column. Thus, they can be used in the same tabletop and table foot construction. The DL10 IC column is available in three standard colours (black, grey and white) - and can optionally be delivered in other colours. An IC system consists of two columns, a master column and a follower column connected via a motor cable. The master column has a built-in control PCB; thus, no separate control box must be mounted in an IC system. The mains supply is an external SMPS (Switch Mode Power Supply) unit, and a variety of desk panels can be used for adjusting the desk. A Desk Sensor™ 1 anti-collision dongle can be added to the system to limit material damage to a desk or an object in case a collision occurs during driving of the desk. Features: • Max. load: 500 N per column • Max. speed: 38 mm/s unloaded • Standard installation dimension: 645 mm • Standard stroke length: 500 mm • Weight: Approximately 6.5 kg per column • Dimensions column: ø70 mm (outer profile) and ø63.5 mm (inner profile) • Dimension motor housing: 177 x 97 x 46 mm • Colour: Available in black (RAL 9005), grey (RAL 9006) or white (RAL 9016) • Low noise level Option: • PLUS™: - No visible gliding pads - Available with trim rings in black, grey or white • Available as DESKLIFT™ SetPack LINAK.COM /DESKLINE Usage: • 2 parallel drive with one DL10 IC Master and one DL10 IC Follower, and an external power supply (SMPS001 (230 V), SMPS002 (120 V) or SMPS006 (Universal)) • Duty cycle: 10 % ≈ 2 minutes continuous use at full load, followed by 18 minutes pause • For indoor use in dry locations • Ambient temperature: 10 to 40 °C • Storage and transportation temperature: -10 to +70 °C • Compatible with DESKLINE ® controls • Compatible with the Kick & Click™ mounting solution • Compatible with DESKLIFT™ Feet • System compliance, see the Declaration of Conformity in the User Manual Be aware that, when a desk panel with display is used, the light intensity must be configured to 50 % before use. With a fully retracted length of 645 mm and a stroke length of 500 mm, it is possible for a standard system to obtain an adjust- ment range of the tabletop from e.g. 680 to 1180 mm. Thus, the desk can be used for sitting as well as for standing types of work.
Download PDF file