• Minimum built-in dimensions: Standard and High Performance version: Stroke + 170 mm With mechanical spline, stroke + 180 mm With QR, stroke + 180 mm With mechanical spline and QR, stroke + 190 mm With ratchet spline and QR, stroke + 180 mm With QR Damper, add 15 mm to BID for all QR versions Patient Lift version: Stroke + 274 mm; S ≤ 300 mm Stroke + 294 mm; S ≤ 400 mm • Positioning options: Dual Hall with power switches & dual Hall analogue, encoded with signal switches (16 pulses per rev.) Potentiometer input 0-5 Volt • Quick release: Internal, only for LA40 Standard versions • Quick release Damper: Internal, only for LA40 Standard versions • Manual lowering: Only for Patient Lift version • Noise level: ≤ 50 dB (A) • Nut: Guided spindle nut for Standard and High Performance Non-guided spindle nut for Patient Lift version (ML) • Safety nut: Standard • Spline: Mechanical spline Ratchet spline (for Standard, PL, HP and QR versions only) • Required activation force during inward operation: 50-100 N • For QR versions: Force required to manually activate spline (actuator not in operation): Static pull force = 300-550 N • Built-in electrical limit switch: Signal switch or power switch • Built-in endstop: Mechanical (for safety only) • Exchangeable cable: Minifit plug • Safety factor is: Up to 2.5 Beds = 2.0 Medical = 2.5 (Standard and HP versions) in accordance with norms Medical = 2.0 (PL version) in accordance with norms • Weight: > 2.0 kg (depending on version and specification) • Static bending moment: No side load allowed • Feedback type: None, dual hall (digital or encoded dual hall) Potentiometer (only for QR version) Usage: • Duty cycle: 10%, 2 minutes continuous use, followed by 18 minutes not in use • Usage temperature: 5 o C to 40 o C • Storage temperature: -10 o C to 50 o C • Compatibility: Compatible with LINAK control boxes. Please contact LINAK. • Relative humidity: 20% to 80% - non-condensing • Atmospheric pressure: 700 to 1,060 hPa • Height above sea level: Max. 3,000 meters • Flammability rating: UL94V-2 • Approvals: IEC 60601-1, ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No 60601-1 Technical specification Actuator type Motor type LA40 Std. LA40 Std. LA40 Std. LA40 Std. LA40 HP LA40 PL LA40 Std. LA40 Std. LA40 Std. LA40 Std. LA40 Std. LA40 Std. LA40 Std. LA40 Std. Standard (B) Standard (B) Standard (B) Standard (B) HP motor (G) PL motor (F) Standard (B) Standard (B) QR QR Standard (B) Standard (B) Standard (B) Standard (B) Power Supply Spindle pitch (mm) Max. load Push (N) Self- locking Push (N) 24 VDC 3 33 VDC 3 24 VDC 4 33 VDC 4 33 VDC 4 24 VDC 4 24 VDC 4 33 VDC 4 24V DC 5 33V DC 5 24V DC 5 33V DC 5 24V DC 9 33V DC 9 8,000 8,000 8,000 8,000 8,000 8,000 6,000 6,000 4,000 4,000 4,000 4,000 1,500 1,500 8,000 8,000 8,000 8,000 8,000 8,000 6,000 6,000 4,000 4,000 4,000 4,000 1,500 1,500 Max. load pull without spline (N) 2,000 2,000 2,000 2,000 2,000 - 2,000 2,000 - - 2,000 2,000 1,500 1,500 Typical speed at 0/max. load (mm/sec.) Typical current at full load (Amps) 4.1/2.5 5.5 5.5/4.0 5.5 5.5/3.0 6.1 7.3/5.0 6.3 9.2/6.5 7.5 9.3/6.1 9.0 5.5/3.6 5.1 7.3/5.6 5.0 6.5/5.2 3.5 9.0/7.5 3.7 6.5/5.2 3.5 9.0/7.5 3.7 11.9/10.4 2.3 16.3/14.9 2.3 Please note that extension of the built-in dimension may reduce the safety factor.
Download PDF file