LA40 HOMELINE | 3 Features and options Load in push Static load in pull Housing colour Protection class Motor Stroke length Minimum built-in dimensions Positioning options Noise level Nut Safety nut Spline Built-in electrical limit switch Built-in endstop Exchangeable cable Safety factor Weight Static bending moment Flammability rating Feedback type 4000 N, 6000 N, 8000 N 2000 N, dynamic pull not allowed Spline not available in pull (static or dynamic) Light grey (RAL 7035) IPX6 24 to 33 V DC, Standard motor 4000 N: 50 - 300 mm (in steps of 5 mm) 6000 N: 50 - 200 mm (in steps of 5 mm) 8000 N: 50 - 250 mm (in steps of 5 mm) Longer stroke lengths are possible - please contact your nearest sales office. This may have influence on the safety factor. Standard, stroke + 170 mm With mechanical spline, stroke + 180 mm Dual Hall with power switches & dual Hall analogue, encoded with signal switches (16 pulses per rev.) Potentiometer input 0 to 5 V ≤50 dB(A) Guided spindle nut Standard Mechanical spline Power switch Mechanical (for safety only) Mini Fit plug 2.0 Approximately 2.0 kg No side load allowed UL94V-2 Dual Hall Usage Duty cycle Temperature Compatibility Relative humidity Atmospheric pressure 10%, 2 minutes continuous use, followed by 18 minutes not in use Operation: Storage: 5 to 40 °C -10 to +50 °C TD4 Advanced, TD5 Advanced and CBD6DC HOMELINE 20% to 80% @ 30 °C - not condensing 700 to 1060 hPa (3000 m) Technical data Power supply Spindle pitch (mm) 24 V DC 3 29 V DC 3 24 V DC 4 29 V DC 4 Max. load Push (N) 8000 8000 8000 8000 Self-locking Push (N) 8000 8000 8000 8000 Motor type Standard Standard Standard Standard Typical speed at 0 / max. load (mm/s) 3.5 / 2.0 4.9 / 3.2 4.8 / 2.5 5.4 / 4.0 Typical current at full load (A) 5.5 5.5 6.1 6.3 Comments on technical specifications Self-locking ability LINAK control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s) when the actuator(s) is/are not running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) is/are not connected to a LINAK control box, the terminals of the motor must be short-circuited to achieve the self-locking ability of the actuator(s).
Download PDF file