MEASURING CORNER SOLUTION RECOMMENDED MEASUREMENT TOOLS: Laser distance meter Ruler Spirit level (1.5-2 m) Camera A guide for successful measuring (corner solution). • NOTE! Start by checking whether the floor is level. • If the floor is level, use two small blocks to place the laser distance meter/ruler at the highest points (3 places). Based on this you can determine whether the ceiling is slanted (always order your configuration using the smallest measure). Measure the height where the doors are to be located (standard depth – 68 cm). • If there is a slant, evaluate whether you need a carcass, a bottom/top or both. • Inspect the wall(s) for slants and specify the smallest width measure (measure the width at three different heights). • NOTE! In case of a corner solution, check the angle of the corner. Useful advices: • Check the location of sockets, radiators, skirting, edge tiles etc. in relation to the location of the wardrobe. . • Take a picture of the place where the wardrobe will be installed to use as help when drawing the wardrobe in the store. Width A A1 A2 A A3 Depth A Width B B1 B B3 Depth B Width A: Width B: Depth A: Depth B: Height A1: Height A2: Angle degrees A3: Height B1: Height B2:
Download PDF fil